C3 and C103 on the G9 parts list

Smoke · Nov 20, 2004

As far as the schematic and the layouts go, I believe C3 and C103 should be 22OnF not 470nF on the components list, and on Paul Stephens parts list.

Is this just a mistake or theres a specific reason it is substituted? What would this modification do, and is it alright in any situation to substitute a larger capacitance value?

Thanks

mcs · Nov 20, 2004

The schematic I have shows 470nF, but the PCB layout shows 220nF. I have used 220nF, because I just stuffed the PCB with parts from my drawers - not from a parts list. But which value is actually correct?

Best regards,

Mikkel C. Simonsen

gyraf · Nov 21, 2004

Both will do fine. It's just a grid DC-blocking cap - looking into 1M.

Jakob E.

C3 and C103 on the G9 parts list

Help Support GroupDIY Audio Forum:

Smoke

Well-known member

mcs

Well-known member

gyraf

Well-known member

Similar threads

Latest posts

C3 and C103 on the G9 parts list

Help Support GroupDIY Audio Forum:

Smoke

Well-known member

mcs

Well-known member

gyraf

Well-known member

Similar threads

Latest posts

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!