Peerless 16402 OPT for Altec 436a

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I have this pupy with an open primary, Im thinking on take it apart, You think is repairable?
 

Attachments

  • 26654586_1568800483214611_850056599_o.jpg
    26654586_1568800483214611_850056599_o.jpg
    743.3 KB · Views: 36
Thanks so much for the Dissection! I wonder if one can wind the coils with the same wire gauge and turns but using a nowadays commercial lam and still keep more or less the same transformer behaviour.
I want to build a copy of an Altec 436, or better, EMI RS124, but where I live, to pay for a Lundahl or Sowter Trasformer is nearly impossible.
Do you guys know some simmilar L lam?
 
Just for the record, I successfully disassemble the transformer and repaired it.  Luck of mine that one of the wires coming out of the primary winding broke just before entering deep in the winding, So Im very happy.

cheers!
 

Attachments

  • 26654522_10213074560372894_949960937_o.jpg
    26654522_10213074560372894_949960937_o.jpg
    625.3 KB · Views: 69
Back
Top