Adjusticator

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Davo

Well-known member
Joined
Feb 13, 2006
Messages
504
Location
LA CA
I knocked up a home etch file for the Adjusticator, to adapt some guitar pedals to line level.
http://www.geofex.com/circuits/Adjusticator.gif

If anyone wants the etch file, just let me know and I'll post it.  

And to make sure I'm not steppin on any toes, the bottom of
the page states "Copyright R.G Keen.... no permission for local copies or presentation from web sites other than...  etc."
I assume that this refers to the schemo... but I'm no legal expert, so I'm not sure if it includes this as well.

Cheers,
Dave
 

Attachments

  • overlay.JPG
    overlay.JPG
    127.3 KB · Views: 228
Nice one Dave!

Yeah the home etch file would be great. I love using guitar pedals in my mix so this unit will come in very handy.
Might as well make it my first etching experience as well.... :D

J
 
this is what i needed the other night,
thanks a lot :)

u r fine by sharing the link... it would be a problem if you have had uploaded to another ftp, and shared it from there...
 
Hi Matthew and Kambo, 
Cool, glad you guys can use it!! I haven't etched this myself yet, but it's a simple little circuit and it looks to
be correct.

Here ya go

Cheers,
Dave

btw, Matthew, if you haven't gotten you're etchant yet, give Sodium persulfate a shot... I used it the other day for the
first time, and I'll never go back to ferric chloride!!
 

Attachments

  • copper.JPG
    copper.JPG
    203.3 KB · Views: 94
Back
Top