MXR Auophaser - psu voltage?

Pierrelegere · Oct 17, 2009

Hi, I am just about to rack a MXR autophase module. The pinout is labeled on the unit,
but not the voltage. Is it 15V? Or 24? Thanks for your help! Best,
Peter

analogguru · Oct 17, 2009

It will accept anything between 15V - 30V/ 34mA (single supply).

analogguru

Pierrelegere · Oct 20, 2009

thanks for your help!
It does not work properly, does anybody has the schemos by chance?
best,
Peter

analogguru · Oct 20, 2009

Pierrelegere said:
thanks for your help!
It does not work properly, does anybody has the schemos by chance?

Sadly no, but with good pictures from both sides of the pcb a schematic could be created.

analogguru

Rob Flinn · Oct 20, 2009

I had to fix one of these for someone once. There are tantalum bead capacitors in the circuit. try swapping them out !

Also the control voltage in & out need to be linked

the mxr autoXXXXXXx range have been covered a bit before ! see here

http://www.groupdiy.com/index.php?topic=16348.0

MXR Auophaser - psu voltage?

Help Support GroupDIY Audio Forum:

Pierrelegere

Active member

analogguru

Well-known member

Pierrelegere

Active member

analogguru

Well-known member

Rob Flinn

Well-known member

Similar threads

Latest posts

MXR Auophaser - psu voltage?

Help Support GroupDIY Audio Forum:

Pierrelegere

Active member

analogguru

Well-known member

Pierrelegere

Active member

analogguru

Well-known member

Rob Flinn

Well-known member

Similar threads

Latest posts

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!