tommypiper

Re: 500 series Neve 1084 eq... prototype two on test
« Reply #260 on: December 26, 2009, 06:44:12 PM »
Hey Peter, thanks, it's looking very good.   :)

Regarding output iron, are you aware of the new Lundahl based on the LO1166?  http://www.lundahl.se/pdfs/datash/2734.pdf  It could be soldered right onto your board, if it fits.  Would have plenty headroom.

 :o
« Last Edit: December 26, 2009, 06:48:15 PM by tommypiper »
Imagine a wet, slightly chilled from its gas release and decompression, with water droplets condensing, sucking surface tension, slowly sliding down the side, capped by a healthy virgin froth on top..


funkymonksf

Re: 500 series Neve 1084 eq... prototype two on test
« Reply #261 on: December 26, 2009, 09:13:09 PM »
I'm definitely up for one when it's done. Very exciting to this come together. Any more news Peter?

haima

Re: 500 series Neve 1084 eq... prototype two on test
« Reply #262 on: December 26, 2009, 09:17:46 PM »
he said it'll be done when it's done. stay cool. 8)

tommypiper

Re: 500 series Neve 1084 eq... now with extra 51X..!!
« Reply #263 on: December 26, 2009, 10:54:47 PM »
Where did you get the shiny 31267 mounting bracket?  

From some old Audix modules.
Tim at SCA has them.

Just heard back from Tim.  He has them manufactured, and won't sell them.  Apparently they are part of a kit or something.  

So, an odd part to be sourced for your PCB...  It's probly easy enough to DIY them from copper or tin  sheet... :)
« Last Edit: January 09, 2010, 02:56:37 PM by tommypiper »
Imagine a wet, slightly chilled from its gas release and decompression, with water droplets condensing, sucking surface tension, slowly sliding down the side, capped by a healthy virgin froth on top..

Re: 500 series Neve 1084 eq... prototype two on test
« Reply #264 on: December 27, 2009, 07:02:23 AM »
So, an odd part to be sourced for your PCB
No. The holes in the pcb line up with the screws in the Carnhill casing.

are you aware of the new Lundahl
I wasn't, but am now. Still too big anyway.

Any more news Peter?
Some sh*t**** tried to blow up a plane.

http://www.lazpro.com
I reserve the right to not sell to idiots

onlymeeee

Re: 500 series Neve 1084 eq... prototype two on test
« Reply #265 on: December 27, 2009, 09:08:00 AM »
Hey Peter,

Hope you had a good crimbo.

I see you used a marinair traffo there.  Do you happen to know whether the marinair screws line up the same with a carnhill?  Also is it the same size physically or bigger than a Carnhill?

Cheers.

No worries if not


Re: 500 series Neve 1084 eq... prototype two on test
« Reply #266 on: December 27, 2009, 09:29:19 AM »
Same same
http://www.lazpro.com
I reserve the right to not sell to idiots

onlymeeee

Re: 500 series Neve 1084 eq... prototype two on test
« Reply #267 on: December 27, 2009, 11:08:18 AM »
Lovely jubbly

emreyazgin

Re: 500 series Neve 1084 eq... prototype two ready for testing
« Reply #268 on: January 05, 2010, 05:55:36 PM »
Avec knobage et sweesh.



Maginifique! You got the x-factor equivalent of electronics! DC-Factor or AC-Factor or stg like that :)

Mark Burnley

Re: 500 series Neve 1084 eq... prototype two on test
« Reply #269 on: January 05, 2010, 06:13:53 PM »
Q-Factor??

Mark
O_O tape is life O_O


emreyazgin

Re: 500 series Neve 1084 eq... prototype two on test
« Reply #270 on: January 05, 2010, 07:54:24 PM »
Q-Factor??

Mark

that definitely makes more sense haha :) spot on ;)

Moses

Re: 500 series Neve 1084 eq... prototype two on test
« Reply #271 on: January 09, 2010, 02:38:36 PM »
I'd be in for at least 2, dependent on cost!!

Any further news on an ETA, or projected cost?

Mo

Re: 500 series Neve 1084 eq... prototype two on test
« Reply #272 on: January 18, 2010, 08:10:39 AM »
Any further news on an ETA, or projected cost?

Mo

Not at the mo Mo.
http://www.lazpro.com
I reserve the right to not sell to idiots

Moses

Re: 500 series Neve 1084 eq... prototype two on test
« Reply #273 on: January 19, 2010, 04:46:05 AM »
Cool!!

I use that to choose DIY projects... Eeny Meeny Miney.... Mo's!! Guess Im doing this one too, then... ;)

Mo

Re: 500 series Neve 1084 eq... prototype two on test
« Reply #274 on: January 25, 2010, 04:02:13 PM »
OK boys,
Ed is nearing completion of the output transformer development and AndyP reckons my poo doesn't stink with this module, so what I will be offering will be.........

PCB set (mainboard & amp boards)
500 series metalwork
mounting hardware
2 toggle switches
Heatsink
Sockets & pins for the amps
P&P included

That lot will set you back 135GBP per channel, plus 4% paypal fees.

If you're up for it.... paypal (at) lazpro.com
« Last Edit: January 25, 2010, 06:43:16 PM by peter purpose »
http://www.lazpro.com
I reserve the right to not sell to idiots

janvanvolt

Re: 500 series Neve 1084 eq... prototype two on test
« Reply #275 on: January 25, 2010, 05:06:47 PM »
135 for one ?  I definitely take one. What's missing ?


Re: 500 series Neve 1084 eq... prototype two on test
« Reply #276 on: January 25, 2010, 05:46:08 PM »
135 for one ?  I definitely take one. What's missing ?

Yes, for one channel.
Everything except what's listed above.
http://www.lazpro.com
I reserve the right to not sell to idiots

Ptownkid

Re: 500 series Neve 1084 eq... prototype two on test
« Reply #277 on: January 25, 2010, 06:15:04 PM »
Everything except what's listed above.

Hahaha, awesome!!!

Keep up the good work Peter!

Re: 500 series Neve 1084 eq... taking orders
« Reply #278 on: January 25, 2010, 06:21:09 PM »
Hi,

Some (hopefully not stupid) questions:

1) Is there a BOM available?
2) Are the inductors, trannies or grayhills custom jobs?
3) Do the rockers replace the toggles as seen in the photos?
4) Does the 500 metalwork include the front panel?
5) Does P&P mean postage/shipping?
6) Is this my last question?  :P

Thanks!
Chris
"Kind of like going into Safeway at 4 in the morning and chugging a beer in the produce section; been there, done that." - CJ

"We're not making an atomic bomb, just cooking a few electrons." - PRR

Re: 500 series Neve 1084 eq... taking orders
« Reply #279 on: January 25, 2010, 06:45:15 PM »
1. shortly
2. Standard fare
3. they're toggles... had a senior moment
4. Of course
5. It does
6. I hope so.
http://www.lazpro.com
I reserve the right to not sell to idiots


 

Related Topics

  Subject / Started by Replies Last post
732 Replies
168242 Views
Last post June 02, 2020, 06:39:08 PM
by Whoops
4 Replies
3171 Views
Last post June 14, 2010, 01:59:34 PM
by erikb1971
123 Replies
36805 Views
Last post February 28, 2011, 07:41:20 AM
by Igor
98 Replies
25602 Views
Last post May 22, 2011, 09:16:50 AM
by [silent:arts]