always wanted to know how to get from 500 to a speak, low level, could be a cool git amp,
or plug a speaker into the output of your mic pre for giggles and stuff.
this was an easy pri/sec job with bi-fi windings used on both, check the cool core clamps also.
i guess the flux is high with so few turns, so the lams might rattle a bit,
ok, 800 turns pri -- 144 tuns sec = 5.5:1 ratio
center tapped bi fi for 4 and 16 ohms
or plug a speaker into the output of your mic pre for giggles and stuff.
this was an easy pri/sec job with bi-fi windings used on both, check the cool core clamps also.
i guess the flux is high with so few turns, so the lams might rattle a bit,
ok, 800 turns pri -- 144 tuns sec = 5.5:1 ratio
center tapped bi fi for 4 and 16 ohms
