user 40373
Well-known member
- Joined
- Nov 22, 2009
- Messages
- 109
I replaced some op-amps in a DBX 163X and was wondering if, and how, to add power supply bypass caps? The op-amps I used are a LME49710 and LME49860. Do I just take a .1uF ceramic capacitor from each pin labelled V and solder the other end to a ground wires? They might already have power supply bypass caps, I'm not sure! Here are the schematics:
http://www.dbxpro.com/product_downloads/Schematics/163X%20Schematic.pdf
I don't fully understand what a phase compensation cap is either ???
http://www.dbxpro.com/product_downloads/Schematics/163X%20Schematic.pdf
I don't fully understand what a phase compensation cap is either ???