Bo Hansen DI layout

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Hi Bo,
any progress on your metal box design ?
I would be really intersted in buying you a few case
or kits if you have some in order to support
your efforts in this project
But i have to say thanks for the allready done amazing work,
best regards
long life DIY !!!!!!!!!
pacemaker
 
hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry hurry



;D ;D ;D

*hint hint*
 
Sorry for the delay.

Here are the first pictures on the small box version with all connectors on the top.
(the lettering on the front plate are fake)

www.hansenaudio.se/techpage.htm

Note: the inside depth in the box only alow space for Lundahl LL1538 and Haufe ST8456, and have no space for Lundahl LL1538XL or OEP A262A3E.

This small box is manufacture by Deltron and have type number 461-0040, finish in grey powder coated paint, size 115x64x55.
(also in black paint, 461-0040E or naturnal aluminium, 459-0040)
You can buy it from Farnell, RS-Components, ELFA and many others.

Next time I will show pictures on a bigger box with pc-card and connectors placed in the box, not on the top plate.
Maybe I also will add a -10dB input jack, because more space on the bigger box. (this not need any changes on the pc-card)

--Bo
 
Silen:arts,

It can take up to 30 seconds before the link will load up, maybe you must try some more times also.

"just release the PCB"

That was good news.
If people will buy, what can I tell them to do ??

Is it the latest version "V8" with the text:  Layout by Luny Tune & Soeren_DK,
next under: Active DI-Box 1975  and  © Bo Hansén 2004.01.20  ??

--Bo
 
Bo Hansén said:
It can take up to 30 seconds before the link will load up, maybe you must try some more times also.
we should be patient enough for the gear porn :D
(first pic loaded fast here, 2nd took some time)

Bo Hansén said:
"just release the PCB"

That was good news.
If people will buy, what can I tell them to do ??

Is it the latest version "V8" with the text:  layout by Luny Tune & Soeren_DK,
next under: © Bo Hansén 2004.01.20  ??
??? ??? ???
my poor english ::)

but we just need some updates  ;D
 
I just discovered this forum and this thread.   
Very nice DI box.  I especially like the small size.

How are you planing on doing the printing?
I build a little passive DI and the only way I could come up with that was affordable was to machine the letters in when the other features in the cover were machined.  Your black printing allows for more text and looks sharp.

Again,, Very nice.

Frank
http://lbpinc.com/DI.html
 
Frank,

I don´t think we will supply any ready metal work for this project, only some simple drawing for the hole placement from two boxes I have use for this first sample PC-cards.
So it is up to the DIY people to pick a nice metal box, and do the painting and lettering in a personally way.


Silent:arts,

Sorry, I misunderstand you, I belive you all ready have PC-cards in stock for sale.
The PCB things are Soeren_DK own baby, so contact him for information, updates and layout copyright.

--Bo
 
Bo Hansén said:
Silent:arts,
Sorry, I misunderstand you, I belive you all ready have PC-cards in stock for sale.
The PCB things are Soeren_DK own baby, so contact him for information, updates and layout copyright
Bo,
now I feel förnärmad (or is it förolämpad ?)
Ich bin jetzt einfach mal beleidigt ;)

languages ...

I have nothing to sell for this DI, but would like to buy some PCBs to build a couple.
there have never been any plans to sell PCBs for this project on my side.
 
Back
Top