Rackmount enclosures in Canada

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

envelope

Well-known member
Joined
Jun 17, 2009
Messages
707
Location
Canada
I am looking for a supplier in Canada who sells enclosures and custom engraved front panels, like 'par-metal', 'front panel express' in the USA
 
Hmm. Bout the only thing i've found is hammond...which are ridiculously expensive. Was another, but can't think of it now. Par metal has good prices, even shipped.
 
theres RP electronics for rack cases...
And for engraving could be proto case..
or any local engraver will do..
 
i've used the RP electronics cases many times with good results. only problem i found is that the 1U is a little shallow for some torroids.
 
I haven't used them for panels but i do buy hardware occasionally. I live close to the border so I have a PO box on the US side and get stuff that way so its usually much cheaper.
 
i built one project with a middle atlantic 2U rackbox. it was more expensive, but it was a bit sturdier than the rp electronics cases. no handles though.
 
Back
Top