Re: TG1 - advice from any one who has built it...
« Reply #40 on: February 02, 2010, 01:51:08 PM »
desol and others...

Do you have a BOM you'd like to share with the group?  :)
"Kind of like going into Safeway at 4 in the morning and chugging a beer in the produce section; been there, done that." - CJ

"We're not making an atomic bomb, just cooking a few electrons." - PRR


RedNoise

Re: TG1 - advice from any one who has built it...
« Reply #41 on: February 02, 2010, 02:24:46 PM »
Partial cahotic bom ... may help for some # (hope so!)

http://www.keepandshare.com/doc/view.php?id=1725437&da=y
If your neighbour is hunger : don't give him fish , teach him how to fish ...
if you don't like it don't buy it ;-)  [Wolker Texas Ranger] ( ;-) )

simonsez

Re: TG1 - advice from any one who has built it...
« Reply #42 on: February 03, 2010, 11:46:53 AM »
is the HOLD is same as input control? I can't find input pot at the schematic...

tommypiper

Re: TG1 - advice from any one who has built it...
« Reply #43 on: February 03, 2010, 12:02:21 PM »
Partial cahotic bom ... may help for some # (hope so!)

http://www.keepandshare.com/doc/view.php?id=1725437&da=y

I cannot get this file to open, or make any sense when it does open.  I'm on a Mac.  I've used Stuffit which opens it into folders which make no sense...

It won't unzip properly.  Word and Excel cannot read it...

Can you use a better format please?
« Last Edit: February 03, 2010, 12:06:27 PM by tommypiper »
Imagine a wet, slightly chilled from its gas release and decompression, with water droplets condensing, sucking surface tension, slowly sliding down the side, capped by a healthy virgin froth on top..

Re: TG1 - advice from any one who has built it...
« Reply #44 on: February 03, 2010, 12:28:48 PM »
I can send it to you if you want Tommy. Unzipped, in word or text file.

PM your email if you want.

EDIT: this file is in XLSX format and needs to be converted to normal XLS, with the microsoft converter.
Also, how old is this BOM file(partial cahotic etc). The BOM included in the zip released last june may be newer anyway?
« Last Edit: February 03, 2010, 01:03:50 PM by desol »

Re: TG1 - advice from any one who has built it...
« Reply #45 on: February 03, 2010, 01:16:46 PM »
well, a bit out of topic but does anyone knows if it's possible to buy only the bypass pcb from somewhere/someone  ???
I'm not interested in the rest of the unit. I just want to try it with one of my projects.

RedNoise

Re: TG1 - advice from any one who has built it...
« Reply #46 on: February 03, 2010, 01:42:47 PM »
Partial cahotic bom ... may help for some # (hope so!)

http://www.keepandshare.com/doc/view.php?id=1725437&da=y

I cannot get this file to open, or make any sense when it does open.  I'm on a Mac.  I've used Stuffit which opens it into folders which make no sense...

It won't unzip properly.  Word and Excel cannot read it...

Can you use a better format please?

This file is for exc*l 2007 , maybe you should get a 2007 reader ?Otherwise PM me !
If your neighbour is hunger : don't give him fish , teach him how to fish ...
if you don't like it don't buy it ;-)  [Wolker Texas Ranger] ( ;-) )

RedNoise

Re: TG1 - advice from any one who has built it...
« Reply #47 on: February 03, 2010, 01:45:43 PM »
desol : I cannot remember how old it is , but I'm quite sure it was based on the "rev2" zip from fester ...
It's cahotic because of colors and some missing # .
If your neighbour is hunger : don't give him fish , teach him how to fish ...
if you don't like it don't buy it ;-)  [Wolker Texas Ranger] ( ;-) )

RedNoise

Re: TG1 - advice from any one who has built it...
« Reply #48 on: February 03, 2010, 01:47:10 PM »
is the HOLD is same as input control? I can't find input pot at the schematic...

IIRC you can find an answer in the "DESCR" (txt file) , it's HOLD or Input pot :

Quote
Fester's clones can be built either with input pot or hold control
If your neighbour is hunger : don't give him fish , teach him how to fish ...
if you don't like it don't buy it ;-)  [Wolker Texas Ranger] ( ;-) )

kooma

Re: TG1 - advice from any one who has built it...
« Reply #49 on: February 03, 2010, 02:14:50 PM »
Partial cahotic bom ... may help for some # (hope so!)

http://www.keepandshare.com/doc/view.php?id=1725437&da=y

I cannot get this file to open, or make any sense when it does open.  I'm on a Mac.  I've used Stuffit which opens it into folders which make no sense...

It won't unzip properly.  Word and Excel cannot read it...

Can you use a better format please?
opens fine on my mac


simonsez

Re: TG1 - advice from any one who has built it...
« Reply #50 on: February 03, 2010, 02:24:42 PM »
Thank's Red..

Re: TG1 - advice from any one who has built it...
« Reply #51 on: February 03, 2010, 03:39:35 PM »
desol : I cannot remember how old it is , but I'm quite sure it was based on the "rev2" zip from fester ...

Hmm. Well i hope so, for those that are using it. I'm using the BOM's (bypass and motherboard) that came in the zip file. I'd never seen this colorful one b4. The only part, i think, that i could see missing were the 220u aluminum caps in the power section. Any others that you know of?
« Last Edit: February 03, 2010, 03:41:48 PM by desol »

simonsez

Re: TG1 - advice from any one who has built it...
« Reply #52 on: February 03, 2010, 04:51:15 PM »
Any substitution for 1N751A? What about using any 5.1v/0.5w Zener diode? Thank you..

Re: TG1 - advice from any one who has built it...
« Reply #53 on: February 03, 2010, 05:20:56 PM »
Any substitution for 1N751A? What about using any 5.1v/0.5w Zener diode? Thank you..

Don't think so. Only HS2051.

Re: TG1 - advice from any one who has built it...
« Reply #54 on: February 03, 2010, 10:24:54 PM »
"Kind of like going into Safeway at 4 in the morning and chugging a beer in the produce section; been there, done that." - CJ

"We're not making an atomic bomb, just cooking a few electrons." - PRR

RedNoise

Re: TG1 - advice from any one who has built it...
« Reply #55 on: February 04, 2010, 03:42:35 AM »
I just would like to tell everyone I ofently make mystakes in my boms so please check everything.
My colour code is just a personnal way to know the statuts of the parts (To order / ordered / received / soldered ...)
If your neighbour is hunger : don't give him fish , teach him how to fish ...
if you don't like it don't buy it ;-)  [Wolker Texas Ranger] ( ;-) )

tommypiper

Re: TG1 - advice from any one who has built it...
« Reply #56 on: February 04, 2010, 10:52:49 AM »
Partial cahotic bom ... may help for some # (hope so!)

http://www.keepandshare.com/doc/view.php?id=1725437&da=y

I cannot get this file to open, or make any sense when it does open.  I'm on a Mac.  I've used Stuffit which opens it into folders which make no sense...

It won't unzip properly.  Word and Excel cannot read it...

Can you use a better format please?
opens fine on my mac
How did you open it?  Thanks.
Imagine a wet, slightly chilled from its gas release and decompression, with water droplets condensing, sucking surface tension, slowly sliding down the side, capped by a healthy virgin froth on top..

simonsez

Re: TG1 - advice from any one who has built it...
« Reply #57 on: February 09, 2010, 01:18:13 AM »
I nearly finish this box, get some kind of thumping issues, any thought? Thanks you..

Re: TG1 - advice from any one who has built it...
« Reply #58 on: February 09, 2010, 03:39:33 AM »
get some kind of thumping issues, any thought?

Have you adjusted the AOT's?


simonsez

Re: TG1 - advice from any one who has built it...
« Reply #59 on: February 09, 2010, 04:06:38 AM »
Yes, but no luck (AOT 8?) Can you tell me the voltage at Emitter VT1 & VT4? my schema is too blur. Thank you,,


 

Related Topics

  Subject / Started by Replies Last post
310 Replies
82768 Views
Last post April 11, 2009, 07:12:06 PM
by Ethan
14 Replies
5242 Views
Last post April 30, 2007, 08:05:31 PM
by frob
0 Replies
1507 Views
Last post December 29, 2008, 04:52:20 PM
by SUPERMAGOO
6 Replies
1128 Views
Last post November 14, 2018, 01:49:03 PM
by SIXTYNINER