TG1 - advice from any one who has built it...

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Partial cahotic bom ... may help for some # (hope so!)

http://www.keepandshare.com/doc/view.php?id=1725437&da=y
 
RedNoise said:
Partial cahotic bom ... may help for some # (hope so!)

http://www.keepandshare.com/doc/view.php?id=1725437&da=y

I cannot get this file to open, or make any sense when it does open.  I'm on a Mac.  I've used Stuffit which opens it into folders which make no sense...

It won't unzip properly.  Word and Excel cannot read it...

Can you use a better format please?
 
I can send it to you if you want Tommy. Unzipped, in word or text file.

PM your email if you want.

EDIT: this file is in XLSX format and needs to be converted to normal XLS, with the microsoft converter.
Also, how old is this BOM file(partial cahotic etc). The BOM included in the zip released last june may be newer anyway?
 
well, a bit out of topic but does anyone knows if it's possible to buy only the bypass pcb from somewhere/someone  ???
I'm not interested in the rest of the unit. I just want to try it with one of my projects.
 
tommypiper said:
RedNoise said:
Partial cahotic bom ... may help for some # (hope so!)

http://www.keepandshare.com/doc/view.php?id=1725437&da=y

I cannot get this file to open, or make any sense when it does open.  I'm on a Mac.  I've used Stuffit which opens it into folders which make no sense...

It won't unzip properly.  Word and Excel cannot read it...

Can you use a better format please?

This file is for exc*l 2007 , maybe you should get a 2007 reader ?Otherwise PM me !
 
desol : I cannot remember how old it is , but I'm quite sure it was based on the "rev2" zip from fester ...
It's cahotic because of colors and some missing # .
 
simonsez said:
is the HOLD is same as input control? I can't find input pot at the schematic...

IIRC you can find an answer in the "DESCR" (txt file) , it's HOLD or Input pot :

Fester's clones can be built either with input pot or hold control
 
tommypiper said:
RedNoise said:
Partial cahotic bom ... may help for some # (hope so!)

http://www.keepandshare.com/doc/view.php?id=1725437&da=y

I cannot get this file to open, or make any sense when it does open.  I'm on a Mac.  I've used Stuffit which opens it into folders which make no sense...

It won't unzip properly.  Word and Excel cannot read it...

Can you use a better format please?
opens fine on my mac
 
RedNoise said:
desol : I cannot remember how old it is , but I'm quite sure it was based on the "rev2" zip from fester ...

Hmm. Well i hope so, for those that are using it. I'm using the BOM's (bypass and motherboard) that came in the zip file. I'd never seen this colorful one b4. The only part, i think, that i could see missing were the 220u aluminum caps in the power section. Any others that you know of?
 
I just would like to tell everyone I ofently make mystakes in my boms so please check everything.
My colour code is just a personnal way to know the statuts of the parts (To order / ordered / received / soldered ...)
 
kooma said:
tommypiper said:
RedNoise said:
Partial cahotic bom ... may help for some # (hope so!)

http://www.keepandshare.com/doc/view.php?id=1725437&da=y

I cannot get this file to open, or make any sense when it does open.  I'm on a Mac.  I've used Stuffit which opens it into folders which make no sense...

It won't unzip properly.  Word and Excel cannot read it...

Can you use a better format please?
opens fine on my mac
How did you open it?  Thanks.
 
Back
Top