PRR

AMP crimp-tool 45099
« on: April 18, 2010, 08:29:59 PM »
I was at a garage-sale and came away with an AMP crimp-tool 45099.



I thought it did spade-crimps, but instead it crimps those pin/socket things you insert in DB-9 etc connectors.

Is it any use to me? To anybody?


BradAvenson

Re: AMP crimp-tool 45099
« Reply #1 on: April 19, 2010, 09:17:08 AM »
I found that some of the generic dsub crimpers also worked on the molex KK or amp CTA connector series as well. 
I'm not sure if it works as well with a more specialized tool though. 

riggler

Re: AMP crimp-tool 45099
« Reply #2 on: April 19, 2010, 03:04:12 PM »
Not to hijack the thread, but the old AMP crimper I have LOOKS like it will crimp the Molex KK series (2759 terminals for one...), but it is too tight.
I looked and looked and found some crimpers that would work, still for almost $200...

But then, I found that the Radio Shack "D-Sub Crimp Tool" works PERFECTLY, and it's $10.00!
Why does it happen? Because it happens - Roll the bones...


 

Related Topics

  Subject / Started by Replies Last post
19 Replies
11115 Views
Last post July 19, 2005, 08:37:36 PM
by Seedysea
15 Replies
8326 Views
Last post March 30, 2007, 03:23:42 PM
by Ilya
17 Replies
11379 Views
Last post December 21, 2009, 04:51:57 PM
by mathsieve
18 Replies
2786 Views
Last post October 08, 2018, 12:44:36 PM
by Rob Flinn