Amek/Tac Bullet Knobs

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

portix

Active member
Joined
Nov 6, 2009
Messages
28
Location
Wallifornia
Hello,

I'm in the restoration for a Tac Bullet 10/4/2 console. They are several pot knobs missing.
I've wrote to Amek, they send me to AML. I wrote to AML they send me to Farnell, but without part number, I can't found the good reference.
Is somebody know the way to buy knobs?

Regards,

Marc
 
Hi,
there not the same im afraid.
mine are same shape but dark blue / turquoise colour and have 3.8mm collets.

 
They are no longer manufactured.... the best thing to do is just get 4mm shaft collet knob instead.... www.canford.co.uk sell 4mm collet sifam knobs.

Colin
www.audiomaintenance.com
 
1-62-1.jpg


Here is the clear knobs Jeff is selling. If your after a couple then your best bet is to look elsewhere, but Jeff may be able to help you as well.

It's close to the design but with out the taper and collet and I believe Jeff sells a color insert.
 
Thanks.
The Sifam seems to have a closer shape, and with a gray color spray it can make the illusion...
I continue the investigations  ;)
 
Back
Top