Power cable for Dolby 361 unit?

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

rascalseven

Well-known member
Joined
Jun 3, 2004
Messages
906
Location
"Tejas"
Anyone know where I can get a power cable for the oval, 3-prong power connector from an early 1970's Dolby 361 NR unit?  I suppose I could do some metalwork and install a modern IEC connector, but would rather just find a compatible cable if it's not too difficult (or expensive).

Anyone know?

Thanks!

JC
 
IIRC some old HP test equipment uses that connector. It's a rare one. Luckily mine came with power cables.
 
rascalseven said:
Anyone know where I can get a power cable for the oval, 3-prong power connector from an early 1970's Dolby 361 NR unit?  I suppose I could do some metalwork and install a modern IEC connector, but would rather just find a compatible cable if it's not too difficult (or expensive).

Anyone know?

Thanks!

JC

Mouser part number 686-17952. 
Older HP test gear does use a similar cable, but the conductor polarity is reversed.
 

Latest posts

Back
Top