GSSL Left & Right Volumes Aren't Perfect...

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

tgauge

Member
Joined
Apr 22, 2009
Messages
20
Hey everybody, I just finished my first GSSL (besides the front panel and cosmetics) and everything went very very smooth... Almost too smooth.  Plugged it in, tested the voltage points, dropped in the VCAs and passed a mix through it.  The compressor sounds amazing and is dead quiet.  I have only worked on SCA kits and a DIY Summer before this.  I was quite impressed.

Here's the issue: My right channel volume is about .5 decibel lower than the left.  Is there an easy solution to the problem?  I'm assuming that it's due to variance in the resistors or something of that nature.  I can always just adjust the track digitally once it's back in Pro Tools but I would much rather know what the issue is and how to solve it for my next build.

Any suggestions?

Thank you to everyone for your help and the endless amount of data here.  I am so inspired to take on the next challenge.

Happy DIYing!

-Taylor
 

Latest posts

Back
Top