Gates Sta-Level output transformer

takisti · May 6, 2010

Hi,
im planning to order from edcor output transformer for my sta-level project.But I dont know what exact configuration it must be..
can anybody help me with this..

what is the correct ratio?
how powerful it must be?(is 25w primary ok?)
secondary 150 or 300 or 600 ohm?(I know sowter have 8k:150ohm with 7,3:1 ratio)

do anybody have experience with edcor transformer on sta-level output?

thanks,
H.

emrr · May 9, 2010

Originals fall in the range of 5-8k:600, 10W max rating.

takisti · May 13, 2010

Thanks!

day before I read your post I ordered transformers in 8k:150 configuration..
what do you think is it ok or output level will be too low with this?
if its problem ,maybe I can change my order from Edcor..

H.

emrr · May 13, 2010

Should be fine. Remember it's a 8-10W amp, and we use it at less than 0.5W level. Will only really affect your output attenuator setting slightly.

takisti · May 13, 2010

thanks again

I ask them to made both 150 and 600 ohm secondary-later I can choose what is better..and they made it 25w ,as I unerstand its smallest pushpull transformer what they made.

H.

Gates Sta-Level output transformer

Help Support GroupDIY Audio Forum:

takisti

Member

emrr

Well-known member

takisti

Member

emrr

Well-known member

takisti

Member

Similar threads

Latest posts

Gates Sta-Level output transformer

Help Support GroupDIY Audio Forum:

takisti

Member

emrr

Well-known member

takisti

Member

emrr

Well-known member

takisti

Member

Similar threads

Latest posts

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!