[silent:arts]

Re: D-LA2A, D-AOC PCBs / Haufe ST8456 / 51X Rack Accessories
« Reply #200 on: April 24, 2011, 05:05:43 AM »
now in stock again:



D-LA2A 60VA PSU toroidal transformer
custom made to D-LA2A specifications:
primaries: 2 x 115V
secondaries: 2 x 250V / 2 x 0.05A, 2 x 6.3V / 2 x 2A, 1 x 9V / 1 x 1A, CU foil screen
ta 40/E 50/60Hz EN 61558
EUR 36,60 each + shipping + 19% german VAT where applicable


khstudio

Re: D-LA2A, D-AOC PCBs / Haufe ST8456 / 51X Rack Accessories
« Reply #201 on: June 01, 2011, 08:00:29 PM »
Hi Volker,
Do you have any of the "HWBP36-rev01" PCB's?
(Bypass PCBs for the PM670)
... a new revision would be fine too, if there is one.

I could use at least 2 of them, maybe 6... please let me know.

Also, is there a layout or part placement/list for them anywhere?

Thanks,
Kevin
Kevin ~ KHStudio

[silent:arts]

Re: D-LA2A, D-AOC PCBs / Haufe ST8456 / 51X Rack Accessories
« Reply #202 on: June 02, 2011, 03:36:39 AM »
Hi Kevin,

yes, I have a few HWBP36 PCBs left.
let me know your shipping address, will ship six of them for free to compensate your poor man trouble ;D
HWBP36 component placement

khstudio

Re: D-LA2A, D-AOC PCBs / Haufe ST8456 / 51X Rack Accessories
« Reply #203 on: June 02, 2011, 04:39:41 AM »
Hi Kevin,

yes, I have a few HWBP36 PCBs left.
let me know your shipping address, will ship six of them for free to compensate your poor man trouble ;D
HWBP36 component placement

Thanks a lot man... VERY cool of you! ;D
I'll PM you my address.

About my build... I could probably tweak it a little more but it's been running fine & works well. I really like it.
I still have the One tube pulled in the SC... that appears to have helped others out as well with similar problems which is the cool part. I think everyone thought I was nuts way back when... thank GOD that's over. 8)

BTW... I was thinking about getting into your D-LA2A but haven't been around here much lately... got some reading to do.
Kevin ~ KHStudio

[silent:arts]

Re: D-LA2A, D-AOC PCBs / Haufe ST8456 / 51X Rack Accessories
« Reply #204 on: June 02, 2011, 05:51:16 AM »
I'll PM you my address.
packed. will ship tomorrow (holiday here today)

... I really like it.
this is the most important part :) :) :)

Yayogakk

Re: D-LA2A, D-AOC PCBs / Haufe ST8456 / 51X Rack Accessories
« Reply #205 on: June 09, 2011, 06:28:33 AM »
Hi Volker. I emailed you for 2 Haufe ST8456, shipping to France.

Thank you!

Julien

[silent:arts]

Re: D-LA2A, D-AOC PCBs / Haufe ST8456 / 51X Rack Accessories
« Reply #206 on: June 09, 2011, 12:37:20 PM »
Hi Julien,

welcome to the forum.
ups, while typing money came in - that was fast :o
thanks - will pack them now and ship out tomorrow.

kind regards
Volker

Yayogakk

Re: D-LA2A, D-AOC PCBs / Haufe ST8456 / 51X Rack Accessories
« Reply #207 on: June 16, 2011, 09:58:07 AM »
Received today. Thanks for your efficiency!

[silent:arts]

Re: D-LA2A, D-AOC PCBs / Haufe ST8456 / 51X Rack Accessories
« Reply #208 on: June 17, 2011, 03:32:24 PM »
Gentlemen, I received a new batch of 50 x Haufe ST8456 transformers.
Haufe highered the price for each transformer, packing and shipping.

I have some left in stock from the last batch, and will sell them to the old price.
Once they are gone I will need to adjust the price nearer to EUR 30. >:(

[silent:arts]

Re: D-LA2A, D-AOC PCBs / Haufe ST8456 / 51X Rack Accessories
« Reply #209 on: June 22, 2011, 10:48:03 AM »
D-AOC PCBs are back in stock.
However, will be delivered with Bypass PCBs only as far the Bypass PCBs stock allow.


[silent:arts]

Re: D-LA2A, D-AOC PCBs / Haufe ST8456 / 51X Rack Accessories
« Reply #210 on: July 02, 2011, 03:22:04 PM »
Will be away for two or three weeks,
starting middle / end of next week.

Just to let you know: no shipping in this time.

[silent:arts]

Re: D-LA2A, D-AOC PCBs / Haufe ST8456 / 51X Rack Accessories
« Reply #211 on: July 15, 2011, 07:55:36 AM »
received some mails / orders to my iPhone, from where I can't answer (forgot to configure the outgoing part) :-[ :'(

I'm back in Berlin replying to all mails monday evening  8)

who

Re: D-LA2A / Haufe ST8456 / 51X Rack Accessories
« Reply #212 on: August 05, 2011, 11:16:32 AM »
four LA-2A Dual Panels are available for this great project.
http://www.groupdiy.com/index.php?topic=38026.0
sent me a pm if you are interested.
thanks
who
Inductors, Power Trafos, Knobs, Trafo shielding sheets, Frontpanels
http://don-audio.com
https://www.facebook.com/DonAudioShop
Visit us :)

gzpz

Re: D-LA2A / Haufe ST8456 / 51X Rack Accessories
« Reply #213 on: August 06, 2011, 12:01:53 AM »
Thanks!
Got the transformers... 

You'll have to send more candy, my 4 year old ate it all!!!

Thanks,
Dan

baadc0de

Re: Jensamp-51X / D-LA2A / Haufe ST8456
« Reply #214 on: August 08, 2011, 10:51:54 AM »
Ooh, I hope 2 jensamp kits with transformers make it to december.. sadly won't be able to spring before that :/

[silent:arts]

Re: Jensamp-51X / D-LA2A / Haufe ST8456
« Reply #215 on: August 08, 2011, 11:07:27 AM »
Ooh, I hope 2 jensamp kits with transformers make it to december.. sadly won't be able to spring before that :/

we will see. the input transformers are not a problem, I always have them in stock.
the supply for the output makes me an headache.

however, Haufe will still do it, but with EUR 52 for a one up and EUR 48,05 for 50 pieces it doesn't make sense for me to order, pay and stock them (prices excl. VAT and shipping)

since Michaela asked I already told here to be prepared for one off orders ;D
(and there is always the Lundahl option)

Curran

Re: Jensamp-51X / D-LA2A / Haufe ST8456
« Reply #216 on: August 08, 2011, 11:23:32 AM »
what are the jensamp kits like??? I have four of the VP25's from classicapi, and I producer metal and heavy rock bands. are these api rack compatible or do they need the silent arts high voltage rack to function?

[silent:arts]

Re: Jensamp-51X / D-LA2A / Haufe ST8456
« Reply #217 on: August 08, 2011, 11:41:54 AM »
Jensamps are GDIY-511 EXCLUSIVE
they need +/-24V (and+48V)

they are NOT API compatible :)

Grooveteer

Re: Jensamp-51X / D-LA2A / Haufe ST8456
« Reply #218 on: August 08, 2011, 03:01:05 PM »
Hi Volker,

I'd like one Jensamp Basic kit, a parts kit and a Haufe input an Haufe output tranny please.  I'll email PM you for payment.

Cheers,
Grooveteer
« Last Edit: August 08, 2011, 03:06:03 PM by Grooveteer »

leadbreath

Re: Jensamp-51X / D-LA2A / Haufe ST8456
« Reply #219 on: August 08, 2011, 03:32:55 PM »
hi silent arts

do u know if the hauffe output transformers are the same as the Telefunken V672??

i ask cause i have a few spare, nice sounding transformers.

mick
f**k marlbro's and weed ill stick to smoking germanium and silicon