Benny

Re: OV560 / D-LA2A / D-AOC (and more ...)
« Reply #420 on: April 16, 2013, 01:02:09 PM »
emailed for 2x D-AOC pcbs


Cosmonaut

Re: OV560 / D-LA2A / D-AOC (and more ...)
« Reply #421 on: May 29, 2013, 09:49:08 AM »
emailed for 2 x Haufe ST8456 (Bo hansen tx)

[silent:arts]

Re: OV560 / D-LA2A / D-AOC (and more ...)
« Reply #422 on: June 02, 2013, 06:22:47 AM »
Anybody in the need for a 2 x 8 to 8 x transformer balanced out relay based switch?

Did one for a custom job, and have some (limited) PCBs left.

You can see some pictures here:
http://www.nrgrecording.de/nrg/viewtopic.php?t=1623&start=15

(ignore the green PCBs and MIDI stuff, the box does some more jobs, we are talking about the black PCBs)
« Last Edit: June 02, 2013, 06:34:15 AM by [silent:arts] »

Re: OV560 / D-LA2A / D-AOC (and more ...)
« Reply #423 on: June 02, 2013, 12:40:36 PM »
You can see some pictures here:
http://www.nrgrecording.de/nrg/viewtopic.php?t=1623&start=15

...need to either be logged in or register first and log in to access the link on your site...

[silent:arts]

Re: OV560 / D-LA2A / D-AOC (and more ...)
« Reply #424 on: June 02, 2013, 04:15:31 PM »
sorry, looks like you are right.

The pictures:








mulletchuck

Re: OV560 / D-LA2A / D-AOC (and more ...)
« Reply #425 on: June 02, 2013, 09:01:51 PM »
what does it do?
www.youtube.com/mulletchuck for all my recordings

braeden

Re: OV560 / D-LA2A / D-AOC (and more ...)
« Reply #426 on: June 02, 2013, 09:23:24 PM »
what does it do?

I looked at it for a while as well trying to understand it :-X

My guess is that it takes two sets of 8 XLR inputs, routes them through a DB25 connection into the PCB which then allows the relays to switch between the two sets of XLRs (A/B). I'm guessing it then acts as a form of D.I. by balancing the output.

But knowing Rammstein it could also be some sort of flamethrower device.

Please elaborate Volker! ;D

Braeden

[silent:arts]

Re: OV560 / D-LA2A / D-AOC (and more ...)
« Reply #427 on: June 03, 2013, 12:31:27 PM »
what does it do?
A lot of fun  ;)

the main PCB contains 10 relay, all switched at the same time.
the first eight have two 26 pin IDC connectors, relays no 9 & 10 molex, for inputs A & B (I use them for switching MIDI, and mute MIDI thru to prevent MIDI loops if switched to B)
outputs are again one 26 pin IDC and molex.
the 26 pin IDCs have Tascam layout, if you prefer SubD connectors.

the other PCBs are passive, 8 x Neutrik NC3FBV to IDC 26,
and IDC 26 via 8 x Neutrik NTL1 transformers to 8 x Neutrik NC3MBV for outputs.

just a simple A/B switch  8)

didn't want to wire it by hand, so I designed the PCBs with options for SubD25.

the older version just needed too much time doing the wiring:



All the other parts are just PSU(s), and an optical Click system.

[silent:arts]

Re: OV560 / D-LA2A / D-AOC (and more ...)
« Reply #428 on: June 03, 2013, 12:43:23 PM »
My guess is that it takes two sets of 8 XLR inputs, routes them through a DB25 connection into the PCB which then allows the relays to switch between the two sets of XLRs (A/B). I'm guessing it then acts as a form of D.I. by balancing the output.
Right.
The transformers are there to separate the System.
You never know what the light / pyro / kinetic departments do with your signal (they get the master timecode, channel 8).

Learned that lesson hard in 2000 with pyro guys using unbalanced inputs, blowing 32A fuses at the rehearsals etc.
But well, I guess they like blowing up everything, it's their job.
With transformers you are always fine at your side of the game.

[silent:arts]

Re: OV560 / D-LA2A / D-AOC (and more ...)
« Reply #429 on: June 15, 2013, 09:51:44 AM »
*** vacation / no shipping between 23. to 30. June ***


[silent:arts]

Re: OV560 / D-LA2A / D-AOC (and more ...)
« Reply #430 on: July 04, 2013, 07:03:31 AM »
Running out of D-LA2A PCBs and transformers.
However, re-ordered more today.

[silent:arts]

Re: OV560 / D-LA2A / D-AOC (and more ...)
« Reply #431 on: July 04, 2013, 11:08:12 AM »
Only two OV560 kits with OH100 available.
Once those are gone we need to look for another OA10 substitute ...

[silent:arts]

Re: OV560 / D-LA2A / D-AOC (and more ...)
« Reply #432 on: July 05, 2013, 06:23:03 AM »
Two fully built and tested OV560 are up for (private) sale:
EUR 500 each shipped worldwide.

[silent:arts]

Re: OV560 / D-LA2A / D-AOC (and more ...)
« Reply #433 on: July 11, 2013, 10:22:21 AM »
PMV70X Kits are now available!

Nescafe

Re: PMV70X / OV560 / D-LA2A / D-AOC (and more ...)
« Reply #434 on: July 15, 2013, 07:37:47 AM »
Hi Volker,
I have sent You a PM about ordering

Thank You

Re: PMV70X / OV560 / D-LA2A / D-AOC (and more ...)
« Reply #435 on: July 24, 2013, 03:59:36 PM »
paid for one PMV70X! excuse the delay, the car wanted a new exhaust :)

Nescafe

Re: PMV70X / OV560 / D-LA2A / D-AOC (and more ...)
« Reply #436 on: July 31, 2013, 02:37:26 AM »
PCB and Vactrol arrived, so fast! Thank You Volker  :)

Re: PMV70X / OV560 / D-LA2A / D-AOC (and more ...)
« Reply #437 on: September 03, 2013, 01:28:11 PM »
I'd like 1 D-AOC PCB thanks.

email doulos_21(at)yahoo.com for paypal info. 
« Last Edit: September 03, 2013, 01:31:56 PM by doulos30 »

[silent:arts]

Re: PMV70X / OV560 / D-LA2A / D-AOC (and more ...)
« Reply #438 on: September 03, 2013, 02:18:48 PM »
I'd like 1 D-AOC PCB thanks.

email doulos_21(at)yahoo.com for paypal info.

For a quote the location is always important.
please mail me your shipping address to sales[at]51xAudio[dot]com

ravachol

Re: PMV70X / OV560 / D-LA2A / D-AOC (and more ...)
« Reply #439 on: September 04, 2013, 03:31:09 PM »
I was just wondering, are there any K13117 boards/kits still for sale?

Cheers!
Never say "potato" — but you can have one!