51xAudio by [silent:arts]

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Hi,
I'd like to order one Bo Hansén D.I. PCB.
Shipped to Denmark as stated in the email.

Thanks!
Jeppe
 
Some news:

D-LA2A PCBs (50x) and Bo Hansen DI PCBs (200x) are back in stock
PMV70X Kits are back in stock (22x / won't be restocked)
OV560 Kits are back in stock (8x / won't be restocked)

I found my old small stock of original Vactrols, enough for
5 x D-AOC Special (D-AOC Main PCB, 2 x Bypass PCB, 2 x VTL5C4/2)
EUR 60,00 each + shipping + 19% german VAT where applicable
 
Hi Volker,
are the Bo Hansen DI PCBs and Haufe St8456 in stock at the moment?
Gruss

 
Ok cool! How many of these would fit on a rack tray? I`m trying to keep everything rack mounted. Also, how long cable stretches can you have from the PSU to the racks/modules?
 
Cool!

How wide and tall are the enclosure? Could you fit 3 of these on a rack tray (2-3U height?)

How long can the DC cable be (from psu to modules/racks)?

How does this differ from the GDIY51PSU? Is it the same? The pcb in the pictures on the CAPI page seems different and smaller compared to the GDIY51PSU.
 
You can fit 2 next to each other, but not 3.

Dimensions are 17cm x 8,8cm (without rubber feet) x 35cm (without handle, without cable).

How long you want the cable to be?

The GDIY51PSU and Floor Box PSU share the same schematic but are different PCB designs.
 
So if I put them on the side, I could fit 4 of these babies on a rack tray? (Say the inner widht of the tray is 435mm). I`m guessing I`d need 4 u for that tough... So that would compare to having 2 trays with 2 psus on each.
8)
 
Back
Top