[zayance]

a lot of good options for output transformers if there is a pinout for LL1517 and a cutout for API 2503 size... cinemag, jensen, sowter all have catalog offerings that will fit that cutout.  then there's the 2503 from classicapi, the mini 1166 from hairball, and soon the same b11148 output used in the 1176 rev F will be available for peter purpose's la3a 500 module -- that should fit this PCB and have the original 1176 flavor.

ed

what else? 

[RedNoise]

a lot of good options for output transformers if there is a pinout for LL1517 and a cutout for API 2503 size... cinemag, jensen, sowter all have catalog offerings that will fit that cutout.  then there's the 2503 from classicapi, the mini 1166 from hairball, and soon the same b11148 output used in the 1176 rev F will be available for peter purpose's la3a 500 module -- that should fit this PCB and have the original 1176 flavor.

ed

what else? 

a nice expresso ??

[zayance]

a lot of good options for output transformers if there is a pinout for LL1517 and a cutout for API 2503 size... cinemag, jensen, sowter all have catalog offerings that will fit that cutout.  then there's the 2503 from classicapi, the mini 1166 from hairball, and soon the same b11148 output used in the 1176 rev F will be available for peter purpose's la3a 500 module -- that should fit this PCB and have the original 1176 flavor.

ed

what else?  

a nice expresso ??

Of course

[Igor]

I updated page 5, please check if everything is correct.
Thanx to Ed Anderson for output transformers options.
I will be happy to try here b11148 from Hairball Audio as well.

Regarding the T-pads, input and output transformer options.
Hairball Audio has an excellent service, I recommend them for input transformers and T-pads.
My personal choice was LL1524, I liked the sound.
However, API output clones can sound great with API-kinda DOA here.
It is all up to your taste.

I will post very soon the front panel design for 1RU stereo unit.
IMHO, for people who need great sounding stereo FET compressor in 1RU...
this is really cool option.

[Igor]

OK....
Ready?
I ordered 40 PCB's today!
It is OK to pay for pre-orders.

[kepeb]

you still going up till the 20th nov to get orders in or is 40 the limit?

[Igor]

I think F76 PCB's will be available, like CRM or 2254C, at my ordering thread;
by the reason we make some units and want to keep part's cost low,
we will offer the full parts kits at this time, later-really, dunno.
20th Nov is a break for kits orders.

[loopermc5]

OK....
Ready?
I ordered 40 PCB's today!
It is OK to pay for pre-orders.

It's ok to wait till the 20th to pay still?

[Jartu]

Hi Igor!

Two matched units for me pleasee!!

Cheers!

[culteousness1]

Hey Igor!

I'm in for two pcb sets.

greetings from cologne,
culteousness

[3nity]

Igor is that panel made out of pcbs??
I used to work at a pcb manufacturer we use to do panels like that for instrumentation panels.
Nice idea?

[JBVries]

2 kits here

[andre tchmil]

Still some 1524 Iron left.
According to mastermind Igor perfect for these kits.

[RedNoise]

emailed!

[AudioGimmer]

Ok. Been sorting finances.

Igor in for 2 full kits w. matched FETs please.

@ andre tchmil do you have 2 1524 output trannies available still? I'd take 'em


The Gimmer

[andre tchmil]

Ok. Been sorting finances.

Igor in for 2 full kits w. matched FETs please.

@ andre tchmil do you have 2 1524 output trannies available still? I'd take 'em


The Gimmer

sure how many kilograms do you need ?  

email me for ordering, thanks

[wowi]

sh*t, i've missed the 20th. I am in for 1 full kit if it's still possible 

Wolfgang

[Igor]

Still OK. We busy with work, btw, come make music here:
http://www.facebook.com/pages/Tel-Aviv/DB-Music-Studios/157025280987856

If you don't have a phazebuk, don't create an account, it is [email protected]@ng time consumer;
re-newed DB official website will be available soon.

Back to F76...

I ordered 50 nice PCB sets. They will be ready next week.

It is OK to make pre-orders till 1st December, the date we will oder the parts for kits and
PCB's will be ready to ship.

It is OK to pay for kits/PCB's.

[Igor]

PCB's arrived, stuffed, checking now!
PCB orders will be shipped very soon, regarding the kit,
there may be delay due to Grayhill switches and metal brackets,
I will do my best to ship them before Jan 15th.

[chunger]

payment sent for 2 full kits.  Matched FET's please.  Also contacted Andre for Lundahl output transformer option to ship with kit.

Thanks!

VP312DI 500/51x 312 Preamp...PROTO PICS ON PAGE 2!!

Started by jsteiger « 1 2 » The Lab

WRA HZ51X - Recording-DI for 500/51X series - FEELER CLOSED

Started by mikefatom « 1 2 3 4 5 » The Lab

API Vintage Console Channel For 500/51x Format VC528 ST2+

Started by jsteiger « 1 2 3 » The Lab

1176 in 51x/500 format, or 51X-F76 Build Support Thread

Started by Igor « 1 2 ... 11 12 » Dynamic Processors