zayance

Re: 1176 in 51x/500 format: FEELER. Goto page 5 for pre-orders.
« Reply #100 on: October 21, 2010, 02:04:55 PM »
a lot of good options for output transformers if there is a pinout for LL1517 and a cutout for API 2503 size... cinemag, jensen, sowter all have catalog offerings that will fit that cutout.  then there's the 2503 from classicapi, the mini 1166 from hairball, and soon the same b11148 output used in the 1176 rev F will be available for peter purpose's la3a 500 module -- that should fit this PCB and have the original 1176 flavor.

ed
8) 8) what else?  ;D ;D ;D


RedNoise

Re: 1176 in 51x/500 format: FEELER. Goto page 5 for pre-orders.
« Reply #101 on: October 21, 2010, 02:09:14 PM »
a lot of good options for output transformers if there is a pinout for LL1517 and a cutout for API 2503 size... cinemag, jensen, sowter all have catalog offerings that will fit that cutout.  then there's the 2503 from classicapi, the mini 1166 from hairball, and soon the same b11148 output used in the 1176 rev F will be available for peter purpose's la3a 500 module -- that should fit this PCB and have the original 1176 flavor.

ed
8) 8) what else?  ;D ;D ;D


a nice expresso ??
If your neighbour is hunger : don't give him fish , teach him how to fish ...
if you don't like it don't buy it ;-)  [Wolker Texas Ranger] ( ;-) )

zayance

Re: 1176 in 51x/500 format: FEELER. Goto page 5 for pre-orders.
« Reply #102 on: October 21, 2010, 02:10:20 PM »
a lot of good options for output transformers if there is a pinout for LL1517 and a cutout for API 2503 size... cinemag, jensen, sowter all have catalog offerings that will fit that cutout.  then there's the 2503 from classicapi, the mini 1166 from hairball, and soon the same b11148 output used in the 1176 rev F will be available for peter purpose's la3a 500 module -- that should fit this PCB and have the original 1176 flavor.

ed
8) 8) what else?  ;D ;D ;D



a nice expresso ??

Of course

Igor

Re: 1176 in 51x/500 format: FEELER. Goto page 5 for pre-orders.
« Reply #103 on: October 24, 2010, 08:07:10 PM »
I updated page 5, please check if everything is correct.
Thanx to Ed Anderson for output transformers options.
I will be happy to try here b11148 from Hairball Audio as well.

Regarding the T-pads, input and output transformer options.
Hairball Audio has an excellent service, I recommend them for input transformers and T-pads.
My personal choice was LL1524, I liked the sound.
However, API output clones can sound great with API-kinda DOA here.
It is all up to your taste.

I will post very soon the front panel design for 1RU stereo unit.
IMHO, for people who need great sounding stereo FET compressor in 1RU...
this is really cool option.
« Last Edit: November 08, 2010, 05:16:46 PM by Igor »
http://www.ij-audio.com
(new site hopefully will be up in July)

Igor

Re: 1176 in 51x/500 format: FEELER. Goto page 5 for pre-orders.
« Reply #104 on: November 08, 2010, 05:16:02 PM »
OK....
Ready?
I ordered 40 PCB's today!
It is OK to pay for pre-orders.
http://www.ij-audio.com
(new site hopefully will be up in July)

kepeb

Re: 1176 in 51x/500 format: FEELER. Goto page 5 for pre-orders.
« Reply #105 on: November 08, 2010, 06:05:21 PM »
you still going up till the 20th nov to get orders in or is 40 the limit?
pyinag cosle aentttoin

Igor

Re: 1176 in 51x/500 format: FEELER. Goto page 5 for pre-orders.
« Reply #106 on: November 08, 2010, 06:09:58 PM »
I think F76 PCB's will be available, like CRM or 2254C, at my ordering thread;
by the reason we make some units and want to keep part's cost low,
we will offer the full parts kits at this time, later-really, dunno.
20th Nov is a break for kits orders.
http://www.ij-audio.com
(new site hopefully will be up in July)

loopermc5

Re: 1176 in 51x/500 format: FEELER. Goto page 5 for pre-orders.
« Reply #107 on: November 08, 2010, 06:15:17 PM »
OK....
Ready?
I ordered 40 PCB's today!
It is OK to pay for pre-orders.
It's ok to wait till the 20th to pay still?

Jartu

Re: 1176 in 51x/500 format: FEELER. Goto page 5 for pre-orders.
« Reply #108 on: November 13, 2010, 06:13:37 AM »
Hi Igor!

Two matched units for me pleasee!!

Cheers!

culteousness1

Re: 1176 in 51x/500 format: FEELER. Goto page 5 for pre-orders.
« Reply #109 on: November 15, 2010, 03:38:24 PM »
Hey Igor!

I'm in for two pcb sets.

greetings from cologne,
culteousness
"What's all this analog stuff anyhow?" - Bob Pease
"My favorite programming language is ... solder." - Bob Pease


3nity

Re: 1176 in 51x/500 format: FEELER. Goto page 5 for pre-orders.
« Reply #110 on: November 15, 2010, 11:02:22 PM »
Igor is that panel made out of pcbs??
I used to work at a pcb manufacturer we use to do panels like that for instrumentation panels.
Nice idea?
Life is a path, death the destination.

JBVries

Re: 1176 in 51x/500 format: FEELER. Goto page 5 for pre-orders.
« Reply #111 on: November 16, 2010, 12:57:34 AM »
2 kits here
A little bit of the sonic mayhem I bring to the table.....

http://www.soundcloud.com/jbvries

andre tchmil

Re: 1176 in 51x/500 format: FEELER. Goto page 5 for pre-orders.
« Reply #112 on: November 16, 2010, 05:41:05 AM »
Still some 1524 Iron left.
According to mastermind Igor perfect for these kits. 8)

RedNoise

Re: 1176 in 51x/500 format: FEELER. Goto page 5 for pre-orders.
« Reply #113 on: November 16, 2010, 05:50:58 AM »
emailed! ;D
If your neighbour is hunger : don't give him fish , teach him how to fish ...
if you don't like it don't buy it ;-)  [Wolker Texas Ranger] ( ;-) )

AudioGimmer

Re: 1176 in 51x/500 format: FEELER. Goto page 5 for pre-orders.
« Reply #114 on: November 19, 2010, 08:51:01 AM »
Ok. Been sorting finances.

Igor in for 2 full kits w. matched FETs please.

@ andre tchmil do you have 2 1524 output trannies available still? I'd take 'em


The Gimmer

andre tchmil

Re: 1176 in 51x/500 format: FEELER. Goto page 5 for pre-orders.
« Reply #115 on: November 19, 2010, 09:34:42 AM »
Ok. Been sorting finances.

Igor in for 2 full kits w. matched FETs please.

@ andre tchmil do you have 2 1524 output trannies available still? I'd take 'em


The Gimmer


sure how many kilograms do you need ?  ;D

email me for ordering, thanks

wowi

Re: 1176 in 51x/500 format: FEELER. Goto page 5 for pre-orders.
« Reply #116 on: November 21, 2010, 08:07:26 AM »
sh*t, i've missed the 20th. I am in for 1 full kit if it's still possible  :(

Wolfgang

Igor

Re: 1176 in 51x/500 format: FEELER. Goto page 5 for pre-orders.
« Reply #117 on: November 22, 2010, 03:59:54 PM »
Still OK. We busy with work, btw, come make music here:
http://www.facebook.com/pages/Tel-Aviv/DB-Music-Studios/157025280987856

If you don't have a phazebuk, don't create an account, it is [email protected]@ng time consumer;
re-newed DB official website will be available soon.

Back to F76...

I ordered 50 nice PCB sets. They will be ready next week.

It is OK to make pre-orders till 1st December, the date we will oder the parts for kits and
PCB's will be ready to ship.

It is OK to pay for kits/PCB's.

« Last Edit: November 24, 2010, 01:27:12 PM by Igor »
http://www.ij-audio.com
(new site hopefully will be up in July)

Igor

Re: 1176 in 51x/500 format: FEELER. Goto page 5 for pre-orders.
« Reply #118 on: December 09, 2010, 02:45:12 PM »
PCB's arrived, stuffed, checking now!
PCB orders will be shipped very soon, regarding the kit,
there may be delay due to Grayhill switches and metal brackets,
I will do my best to ship them before Jan 15th.
http://www.ij-audio.com
(new site hopefully will be up in July)

chunger

Re: 1176 in 51x/500 format: FEELER. Goto page 5 for pre-orders.
« Reply #119 on: December 12, 2010, 03:41:34 PM »
payment sent for 2 full kits.  Matched FET's please.  Also contacted Andre for Lundahl output transformer option to ship with kit.

Thanks!
DIY photo documentaries consolidated here:  http://studio939.blogspot.com


 

Related Topics

  Subject / Started by Replies Last post
36 Replies
8032 Views
Last post June 30, 2010, 11:18:28 AM
by babyhead
98 Replies
23637 Views
Last post May 22, 2011, 09:16:50 AM
by [silent:arts]
44 Replies
18394 Views
Last post December 17, 2012, 11:20:19 AM
by mulletchuck
229 Replies
76316 Views
Last post September 12, 2019, 05:10:20 PM
by Mike Havok