ruckus328
Well-known member
A while back when I built my first GSSL, I ended up doing some breadboarding for various things I needed. It worked great but looked like crap so I told myself I'd draw up a nice little board at some point. This week I finally got around to doing it. I don't know if there may be any interest for this. It's a simple little board but it address some common issues people often have with their units.
Features:
-True bypass circuit
-Relay signal switching for Turbo or 2x SSC. (Connectors provided for both, just wire into the appropriate connector)
-Connectors & Provisions for using illuminated switches for both turbo and bypass front panel switches
-Connector for front panel LED.
-A dedicated adjustable regulator for running the relays, LED pushbuttons, and front panel LED. This eliminates any addtional load on the main board 12V regulator (a common problem).
If anyone's interested, please let me know. Don't know exactly what the cost'll be until I know if there's any interest, but they're pretty simple so they'd be pretty cheap.
Features:
-True bypass circuit
-Relay signal switching for Turbo or 2x SSC. (Connectors provided for both, just wire into the appropriate connector)
-Connectors & Provisions for using illuminated switches for both turbo and bypass front panel switches
-Connector for front panel LED.
-A dedicated adjustable regulator for running the relays, LED pushbuttons, and front panel LED. This eliminates any addtional load on the main board 12V regulator (a common problem).
If anyone's interested, please let me know. Don't know exactly what the cost'll be until I know if there's any interest, but they're pretty simple so they'd be pretty cheap.