stickjam

Needed: Focusrite ISA-828 schems
« on: September 03, 2010, 07:59:32 PM »
If you have them to share, please email me:  stickjam at comcast dot net

Thanks!

-Bob


stickjam

Re: Needed: Focusrite ISA-828 schems
« Reply #1 on: December 28, 2010, 10:53:29 PM »
Thanks to the guy (or gal) that sent me the schematix for the ISA-828 a few months back -- unfortunately I had my main hard drive crash and no longer have the file, nor the identity of the sender.   This poor lonely never-used card pictured in the link below really needs to fulfill its destiny inside a wonderful DIY (non-ISA-828) octal mic preamp project. :)

If you have the schematics and do not wish to share the whole thing, the only thing of interest is the pinout of the 2-row ribbon cable header connector (grounds, power (including voltages), audio inputs, and connections for the two buttons and 9 LEDs on the front panel.

ISA-828 Digital Option Card

Thanks!
-Bob
« Last Edit: December 28, 2010, 10:57:25 PM by stickjam »

gyraf

Re: Needed: Focusrite ISA-828 schems
« Reply #2 on: December 29, 2010, 03:07:46 AM »
..and if you want to share, please (as always) cc to [email protected]

Jakob E.
..note to self: don't let Harman run your company..

Re: Needed: Focusrite ISA-828 schems
« Reply #3 on: May 05, 2013, 05:04:47 PM »
Hey,  I kinda need this too for a repair.. Is it possible to have the schematics posted or emailed to me? I'd really be greatful. Seanspublic at gmail dot com


Re: Needed: Focusrite ISA-828 schems
« Reply #4 on: July 31, 2020, 06:04:31 PM »
Hello,
Also joining in repairing an 828 with some metering issues. It's just so hard to track down the signal path without the schematic when it's all smd!

It will be really great help!

alexwfm at hotmail dot it

Cheers,
Alex


 

Related Topics

  Subject / Started by Replies Last post
19 Replies
5676 Views
Last post June 28, 2004, 04:31:40 PM
by Jazzy_Pidjay
20 Replies
7135 Views
Last post October 30, 2018, 08:35:10 PM
by NadMk
1 Replies
4802 Views
Last post June 09, 2010, 02:28:34 PM
by beatbelieve
4 Replies
898 Views
Last post January 01, 2019, 09:26:11 PM
by CJ