Can Anyone Guide Me To Drip Version 1 LA2A Info?

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Vikki

Well-known member
Joined
Jun 5, 2004
Messages
276
I have a couple of pcb's for Drips Version 1 La2a, there was a building thread that i have found in the Meta but all drips info is no longer there :eek:. Can anyone guide me to the build thread info, or am i looking in the wrong places.....?
Vikki(uk) ;D
 
Amazing, and many thanks....the 2 boards have been sitting here and a part made box and p.s.u..
Thanks for the welcome, i've always taken a peep in and odd post when i could.....i was taken ill about 5 years back and just getting back on my feet again....
Thanks for your help....i'll see if i can pick up where i left off now....
Vikki ;D
 
I've just built an La2a using the ver 1 board.  

On the jpg called wiring overview, it shows the IEC socket earth connecting to the pcb, & then from the pcb to case ground.  This isn't brilliant, it should connect straight to the case in my view & that is what I did.
 

Latest posts

Back
Top