Gachet

Re: Official G7 microphone help thread
« Reply #100 on: June 03, 2019, 03:28:10 PM »
Hello

How do you guys wire the CT12?
The two pins on the side of the capsule goes to center?


gyraf

Re: Official G7 microphone help thread
« Reply #101 on: June 04, 2019, 04:15:43 AM »
yes, the two on the side are backplates (connect those together and to the +50-60V), the membrane-retaining-ring-connections are front/back

Jakob E.
..note to self: don't let Harman run your company..

Gachet

Re: Official G7 microphone help thread
« Reply #102 on: June 04, 2019, 08:39:48 AM »
Thank you Jacob

So my capsule is wired correctly.
I've tested the connections between the capsule and the tube.
I've measured the styroflex to make sure they are ok.
I reversed the capsule front and back...

But I'm still having the same problem:

When I switch directivities I have:

Figure 8: Lots of lo end , a bit woofy
Cardio: A great sound pretty well balanced
Omni: No lo end at all, like a 500Hz Hi pass...

I recorded it so it's not  the phase issue beetween  headphone and mouth.

Any suggestion?