V9977
Well-known member
I currently use an inkjet to print board layouts on paper, then
apply UV-transparent spray and stick to the board for exposing etc.
This works really quite well for my needs.
Unfortunately the jets often block-up due to rare use causing lines to appear,
which will only go away after 2-3 head cleanings which wastes most of the ink
in the process.
I have found an Epson laser printer (B&W) which I'm considering but my question
is will the black be dark enough for the purposes of exposure as mentioned above?
How does it compare to inkjet? Lighter?
Many thanks for your help.
apply UV-transparent spray and stick to the board for exposing etc.
This works really quite well for my needs.
Unfortunately the jets often block-up due to rare use causing lines to appear,
which will only go away after 2-3 head cleanings which wastes most of the ink
in the process.
I have found an Epson laser printer (B&W) which I'm considering but my question
is will the black be dark enough for the purposes of exposure as mentioned above?
How does it compare to inkjet? Lighter?
Many thanks for your help.