dandeurloo

Re: Collective Cases - PSU cases and 5.5", 9", 11" and 14" cases
« Reply #320 on: February 03, 2013, 01:31:29 PM »
Ptown is right on.  But here it is as well.

Part #: 09 0041 00 07
« Last Edit: April 23, 2013, 10:08:07 PM by dandeurloo »
PROFESSIONAL CHASSIS AND FRONT PANELS FOR DIY PROJECTS: WWW.COLLECTIVECASES.COM

Dan Deurloo
www.collectivecases.com
www.risendrums.com


Re: Collective Cases - PSU cases and 5.5", 9", 11" and 14" cases
« Reply #321 on: February 08, 2013, 08:26:28 AM »

Do you stock the mic power supply cases or are they made in batches for group buys?

Thanks.

dandeurloo

Re: Collective Cases - PSU cases and 5.5", 9", 11" and 14" cases
« Reply #322 on: February 08, 2013, 09:16:41 AM »
I'm stocking as much as I can now.  I still make stuff in batches but I am trying to stay a head of it.  I do currently have the PSU cases in stock!

Please send me an email if you would like some.
PROFESSIONAL CHASSIS AND FRONT PANELS FOR DIY PROJECTS: WWW.COLLECTIVECASES.COM

Dan Deurloo
www.collectivecases.com
www.risendrums.com

Re: Collective Cases - PSU cases and 5.5", 9", 11" and 14" cases
« Reply #323 on: March 07, 2013, 05:47:26 PM »
Dan I think your ez1073 case looks great , payment sent for two.
Simple ez1073 looks so much better IMHO than the neze idea.
Can't wait

skal1

Re: Collective Cases - PSU cases and 5.5", 9", 11" and 14" cases
« Reply #324 on: March 08, 2013, 10:19:17 PM »
hi dandeurloo

is it possible just to buy the front panel for the 1176 ship to uk

cheers

skal

duantro

Re: Collective Cases - PSU cases and 5.5", 9", 11" and 14" cases
« Reply #325 on: March 09, 2013, 11:16:28 PM »
Received my two cases today. They look great as usual. Thanks Dan!

dandeurloo

Fairchild 670 cases
« Reply #326 on: April 13, 2013, 02:16:02 PM »
Hey guys I finally finished these and dropped this one off to a local studio.  We set up in 20 mins and took some pictures with my phone.  I hope you guys like this one.  It was mainly designed to work with Drip boards but I think will work with a lot of them.

Cost is 600 USD plus shipping.









PROFESSIONAL CHASSIS AND FRONT PANELS FOR DIY PROJECTS: WWW.COLLECTIVECASES.COM

Dan Deurloo
www.collectivecases.com
www.risendrums.com

Matador

Re: Collective Cases - PSU cases and 5.5", 9", 11" and 14" cases
« Reply #327 on: April 14, 2013, 12:36:44 AM »
Was anyone else aroused when they saw this?  Just me?? Bueller???

tonycamp

Re: Collective Cases - PSU cases and 5.5", 9", 11" and 14" cases
« Reply #328 on: April 14, 2013, 01:55:04 AM »
At first i was thinking "matador really likes air conditioners :o" But then, when i realized.... i too was aroused! ;)

dandeurloo

Re: Collective Cases - PSU cases and 5.5", 9", 11" and 14" cases
« Reply #329 on: April 14, 2013, 09:37:35 PM »
Thanks glad you guys like it.  If anyone wants to do a point to point build or one that isn't based on the Drip PCB's email me.  I could pretty easily make a few that are not as deep and would work for more versions.

PROFESSIONAL CHASSIS AND FRONT PANELS FOR DIY PROJECTS: WWW.COLLECTIVECASES.COM

Dan Deurloo
www.collectivecases.com
www.risendrums.com


Curran

Re: Collective Cases - PSU cases and 5.5", 9", 11" and 14" cases
« Reply #330 on: April 15, 2013, 06:05:59 PM »
got my CLX VU case today and it looks great!!!! I ordered and paid and it showed up almost within 5 days I think!!! very very quick!!!! Thanks Dan the case looks wonderful!!!

bancho

Re: Collective Cases - PSU cases and 5.5", 9", 11" and 14" cases
« Reply #331 on: April 26, 2013, 02:24:57 AM »
Does the pcb in this case for 670 mounts in horizontal or in vertical position? Did anyone assemble it yet?

dandeurloo

Re: Collective Cases - PSU cases and 5.5", 9", 11" and 14" cases
« Reply #332 on: April 26, 2013, 09:39:30 AM »
It mounts horizontally.  A number of guys are building them now.  Gregory from Drip is doing 3 right now.  No one has finished yet. 
PROFESSIONAL CHASSIS AND FRONT PANELS FOR DIY PROJECTS: WWW.COLLECTIVECASES.COM

Dan Deurloo
www.collectivecases.com
www.risendrums.com

David R.

Re: Collective Cases - PSU cases and 5.5", 9", 11" and 14" cases
« Reply #333 on: April 26, 2013, 05:08:49 PM »
Hi Dan, sent you payment for a stereo CLX VU case.  Thanksl!

Re: Collective Cases - PSU cases and 5.5", 9", 11" and 14" cases
« Reply #334 on: April 28, 2013, 01:50:02 PM »
So I received my two 1073 cases and a access 312 , the faceplates are great , other than some chip marks on the 1073 rack ears.?????
...the rear panel is perfect , 2 inputs one out just wonderful.
The 312 face is perfect,
However....
Was sent  3 tops and bottoms 11 inches deep, 3 sets of sides, two 11 inches deep and one set of 9" ? This wont fit the tops or bottoms sent, to make this even more fun Dan was out of rear panels for the 312.

The tops and bottoms stick out to far to allow the face plate to fit properly ..

I gotta say this is just knocking the wind out of my projects .....

Guess I got spoiled on hairball cases .....pretty much flawless, in fit and finish.

Not happy.

dandeurloo

Re: Collective Cases - PSU cases and 5.5", 9", 11" and 14" cases
« Reply #335 on: April 28, 2013, 09:53:03 PM »
Chipss36 send me an email and I will call ya.  We will get you squared away and fix up whatever is wrong.  I was just about to send out the back panel for the 312. 
« Last Edit: April 28, 2013, 10:17:48 PM by dandeurloo »
PROFESSIONAL CHASSIS AND FRONT PANELS FOR DIY PROJECTS: WWW.COLLECTIVECASES.COM

Dan Deurloo
www.collectivecases.com
www.risendrums.com

nielsk

Re: Collective Cases - PSU cases and 5.5", 9", 11" and 14" cases
« Reply #336 on: May 21, 2013, 08:53:43 AM »
Panels received, look great!
Thanks

sr1200

Re: Collective Cases - PSU cases and ez1073 cases in stock
« Reply #337 on: June 13, 2013, 10:36:22 AM »
Any update on the CLX cases?  My boards are naked and cold, they need a home! lol  ;D ;D
MEI Studio - Long Island, NY: http://www.meirecords.com

bm_dong

Re: Collective Cases - PSU cases and ez1073 cases in stock
« Reply #338 on: June 25, 2013, 03:19:39 AM »
Hi Dan,

I'm working on designing a front panel for your 1U basic case and was wondering what the spacing is for the front panel mounting holes?

Edward

Re: Collective Cases - PSU cases and ez1073 cases in stock
« Reply #339 on: September 23, 2013, 01:21:40 PM »
Tube Mic PSU arrived today, looks fantastic!

Fast shipping, good service and great products!

Thank you!