0dbfs
Well-known member
Hey Guys,
I need to sum a switched TB signal into a HP monitoring chain and was thinking something like this.
The TB audio will be coming from either a shure-automatic-mic-mixer, or from a switched TB out of a console. The HP amp is an HP4.
The goal is to maintain good monitoring signal and have the TB audio mixed in when audio is switched to that line.
I was looking for some feedback and input on resistor values.
Thanks!
- jonathan
I need to sum a switched TB signal into a HP monitoring chain and was thinking something like this.
The TB audio will be coming from either a shure-automatic-mic-mixer, or from a switched TB out of a console. The HP amp is an HP4.
The goal is to maintain good monitoring signal and have the TB audio mixed in when audio is switched to that line.
I was looking for some feedback and input on resistor values.
Thanks!
- jonathan