GSSL power supply question

jwhmca · Feb 17, 2011

So it may seem crazy,

But I'm trying to run two GSSL's from one power supply... Separate REG's etc , but the same transformer... Should there be some kind of separation between the boards after the transformer? Will I get crosstalk by sharing the transformer?

abechap024 · Feb 17, 2011

If your using two separate rectifiers you should be fine.

kante1603 · Feb 18, 2011

abechap024 said:
If your using two separate rectifiers you should be fine.

I also think that´s o.k.,but-thinking about that for a while now-is it necessary to double (if used) the c-r-c-board also?

Thank you,

best,

Udo.

jwhmca · Feb 18, 2011

I thought using two CRC boards might be best... They don't seem like the are available right now... does anyone have a schematic?

MikeClev · Feb 19, 2011

I built 2 gssls in 1 case using a single vero board CRCRC filter supplying both boards. The CRC has a rectifier so it outputs a positive and a negative supply which I wired in to the gssl boards pos and neg regulator inputs.

GSSL power supply question

Help Support GroupDIY Audio Forum:

jwhmca

Well-known member

abechap024

Well-known member

kante1603

Well-known member

jwhmca

Well-known member

MikeClev

Well-known member

Similar threads

Latest posts

GSSL power supply question

Help Support GroupDIY Audio Forum:

jwhmca

Well-known member

abechap024

Well-known member

kante1603

Well-known member

jwhmca

Well-known member

MikeClev

Well-known member

Similar threads

Latest posts

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!