i am using two toroidal trx's connected reverse for B+ and heaters
almost all toroidal trx's have two outputs... 0-12, 0-12, or 0-9, 0-9 etc...
1. when they rate their power, is it for one winding, or for total...
can i parallel connect secondaries as per below, and use smaller VA for the HV side...
almost all toroidal trx's have two outputs... 0-12, 0-12, or 0-9, 0-9 etc...
1. when they rate their power, is it for one winding, or for total...
can i parallel connect secondaries as per below, and use smaller VA for the HV side...
