Poor Man's Pultec EQP1-A
- Thread starter ruffrecords
- Start date
Help Support GroupDIY Audio Forum:
2 here please...
Matthew Jacobs
Well-known member
4 for me please...
chrispbass
Well-known member
At this rate, we'll be getting these for free! ;D
Think I'll have another stereo pair please Ian. (4 sets total)
cheers
C
Think I'll have another stereo pair please Ian. (4 sets total)
cheers
C
Grooveteer
Well-known member
I would like 4 sets as well ;D
kante1603
Well-known member
4 sets please-thx ian!
Udo.
Udo.
0dbfs
Well-known member
I'm in for four channels.
What are you guys planning for makeup gain and transformers?
Thx,
jonathan
What are you guys planning for makeup gain and transformers?
Thx,
jonathan
regarding the solid state I/O board I am near to finish it.
I have showed the schematic in these pages.
I am available for a group buy if there are enought people interested.
This input-out board is solid state only, it uses IC opamps and/or DOA's (APP opamps, 2520 clones, JE990, FT992, melcor, JLM.....)
cheers
Pier Paolo
I have showed the schematic in these pages.
I am available for a group buy if there are enought people interested.
This input-out board is solid state only, it uses IC opamps and/or DOA's (APP opamps, 2520 clones, JE990, FT992, melcor, JLM.....)
cheers
Pier Paolo
culteousness1
Well-known member
There's a feeler for LL5402 iron group buy in the lab.
Maybe this is a sign...
Maybe this is a sign...
0dbfs
Well-known member
ppa said:
Sounds great Pier! Looking forward to adding a couple of these EQ's to the rack. Are you planning your board for self etch?
Best,
jonathan
mylesgm
Well-known member
What impedance does the output of these eq's need to see?
M
M
3nity
Well-known member
Im taking 2 sets please!
Jorge.
Jorge.
Hank Dussen
Well-known member
...and I'll take 2 as well...
ruffrecords
Well-known member
mylesgm said:
Pretty high. 470K or greater would be fine. Ideal for a tube or FET input.
Cheers
Ian
Citrus Hill
Active member
Hi Ian,
This looks like its going to be a great little project. I'm in for 10 sets total if the order is still open.
Thanks,
Rob Mc.
This looks like its going to be a great little project. I'm in for 10 sets total if the order is still open.
Thanks,
Rob Mc.
You can never have too many pultecs..
Similar threads
