nielsk Well-known member Joined Nov 12, 2004 Messages 1,752 Location Megapopulas, Florida May 26, 2011 #1 Does anyone know of a source for the motherboard side type edge connector to mate with a 1081? thanks!
Does anyone know of a source for the motherboard side type edge connector to mate with a 1081? thanks!
P peter purpose Well-known member Joined Jun 3, 2004 Messages 2,082 Location London May 26, 2011 #2 I have a pair..... $400 each... cough.
P peter purpose Well-known member Joined Jun 3, 2004 Messages 2,082 Location London May 26, 2011 #3 Easiest thing is to make a pcb.
S Sarcastic Sound Well-known member Joined Dec 4, 2008 Messages 110 Location San Diego May 26, 2011 #4 try Dan Alexander Audio, if no love there then go to Shep Associates. Worst case try AMS/Neve service department for parts. good luck, it's a pain to get you hands on those... I know cuz I've had to do it.
try Dan Alexander Audio, if no love there then go to Shep Associates. Worst case try AMS/Neve service department for parts. good luck, it's a pain to get you hands on those... I know cuz I've had to do it.
nielsk Well-known member Joined Nov 12, 2004 Messages 1,752 Location Megapopulas, Florida May 27, 2011 #5 I am thinking that a card edge connector to card edge connector PCB will work, then I can just use a regular card edge socket... why did they do this backwards ??? I guess I'll have to make some.
I am thinking that a card edge connector to card edge connector PCB will work, then I can just use a regular card edge socket... why did they do this backwards ??? I guess I'll have to make some.
P peter purpose Well-known member Joined Jun 3, 2004 Messages 2,082 Location London May 27, 2011 #6 This is what they look like. Actually, wasn't someone here making a 51x connector thingy?
gemini86 Well-known member Joined Sep 22, 2008 Messages 2,477 Location Eugene, OR USA May 27, 2011 #7 Classicapi.com
B Brian Roth Well-known member Joined Aug 20, 2005 Messages 3,268 Location Salina Kansas May 27, 2011 #8 Just an idea....use a Dremel tool to lop off two "fingers" on each end of this: http://www.vectorelect.com/Product/Plugbord/3662.htm Or: http://www.vectorelect.com/Product/Plugbord/3662-5.htm I see a bit of stock for these at Newark, Allied, and Mouser in the $25 range. Best, Bri
Just an idea....use a Dremel tool to lop off two "fingers" on each end of this: http://www.vectorelect.com/Product/Plugbord/3662.htm Or: http://www.vectorelect.com/Product/Plugbord/3662-5.htm I see a bit of stock for these at Newark, Allied, and Mouser in the $25 range. Best, Bri