Just to share it here (already posted in Frank's German forum):
A JLM Audio MAC in combination with a JLM Dingo and Volker's little connector PCB.
The (very useful) opto compressor is connected via the Dingo. For the de-balancing part I used a DOA, the balancing part is done with the good old 5532.
The front panel is powder coated, it's absolutely clear that I used a way too small font here. In the future I'll use no fonts smaller than 2mm.
Joe has a new IN5X PCB for this kind of projects, it allows to use a DOA to drive an output transformer.
http://www.jlmaudio.com/shop/index.php?_a=viewProd&productId=128
06/18: Edited title
A JLM Audio MAC in combination with a JLM Dingo and Volker's little connector PCB.
The (very useful) opto compressor is connected via the Dingo. For the de-balancing part I used a DOA, the balancing part is done with the good old 5532.
The front panel is powder coated, it's absolutely clear that I used a way too small font here. In the future I'll use no fonts smaller than 2mm.
Joe has a new IN5X PCB for this kind of projects, it allows to use a DOA to drive an output transformer.
http://www.jlmaudio.com/shop/index.php?_a=viewProd&productId=128
06/18: Edited title