ChrioN
Well-known member
http://gyraf.dk/gy_pd/ssl/ssl_sch.gif
Made a balanced line driver out of the output section of the compressor.
I'm feeding the op amps with +/-15vdc.
I get -12.5vdc at pin1 and +12vdc at pin 7.
Measuring the outputs, past the dc block capacitor, "-" reads 0vdc and "+" reads +11vdc.
I've swapped the output capacitors, and still getting dc at "+".
Whats up with that?
Made a balanced line driver out of the output section of the compressor.
I'm feeding the op amps with +/-15vdc.
I get -12.5vdc at pin1 and +12vdc at pin 7.
Measuring the outputs, past the dc block capacitor, "-" reads 0vdc and "+" reads +11vdc.
I've swapped the output capacitors, and still getting dc at "+".
Whats up with that?
