500 series API 312 with 180° phase adjust
« on: July 12, 2011, 02:33:28 PM »
Any interest?
http://www.lazpro.com
I reserve the right to not sell to idiots


Biasrocks

Re: 500 series API 312 with 180° phase adjust
« Reply #1 on: July 12, 2011, 03:23:06 PM »
I'd be interested in a phase rotator / all pass filter for the 500 series, not necessarily with a mic pre.

Mark
http://SharktankPro.com

"I'd rather use an SPX90 than a UA plugin....." Joe Barresi

Re: 500 series API 312 with 180° phase adjust
« Reply #2 on: July 12, 2011, 03:32:05 PM »
So no then? 8)
http://www.lazpro.com
I reserve the right to not sell to idiots

Biasrocks

Re: 500 series API 312 with 180° phase adjust
« Reply #3 on: July 12, 2011, 05:38:11 PM »
Hi Peter,

The phase rotator is interesting and useful,

when tied to a micpre = more expense than needed for the task at hand.

I've got more than enough mic-pre's currently, so others may view it differently.

Are you planning to be able to use just the rotator part at line level?

Mark
http://SharktankPro.com

"I'd rather use an SPX90 than a UA plugin....." Joe Barresi

abechap024

Re: 500 series API 312 with 180° phase adjust
« Reply #4 on: July 12, 2011, 05:57:10 PM »
Phase rotators please! I already have a lot of pres.....  ;D
AC Sound - some DIY circuitboards

Stagefright13

Re: 500 series API 312 with 180° phase adjust
« Reply #5 on: July 12, 2011, 06:37:38 PM »
Hey that's a great idea. I record drums with mine and would be a nice feature to track that way. I always try to track close to perfect to start. So it's almost pre mixed. Saves time. And makes an awesome headphone mix for the band to be excited about.

John
Amateur experimenter

Kid Squid

Re: 500 series API 312 with 180° phase adjust
« Reply #6 on: July 13, 2011, 02:41:37 AM »
Loving the sound of that, Pete !!
Hope all is well fella,

Regards,
Steve
It is not the same as 4+12, nor is it the same as 4+8, but 4+12 IS the same as 4+8+12....

http://www.facebook.com/LazyLizardLabs

neujan

Re: 500 series API 312 with 180° phase adjust
« Reply #7 on: July 13, 2011, 04:04:48 AM »

I´d be in for a stereopair or maybe 4 or 6, depending on my bankaccount and what my family spends on vacation this summer from my DIYmoney ;D

Just finished the Eq, loving it, merci.

cheers  Jan

hobiesound

Re: 500 series API 312 with 180° phase adjust
« Reply #8 on: July 13, 2011, 06:19:40 AM »
from your initial post i thought you ment a simple polarity switch.... if you could supply a pcb with just a 180 degree phase adjust, electronicaly balanced in/out, i will be in for at least 4.

greetings,

Thomas

evilcat

Re: 500 series API 312 with 180° phase adjust
« Reply #9 on: July 13, 2011, 06:45:40 AM »
I'm in with mic pre include :)


baadc0de

Re: 500 series API 312 with 180° phase adjust
« Reply #10 on: July 13, 2011, 07:06:06 AM »
from your initial post i thought you ment a simple polarity switch.... if you could supply a pcb with just a 180 degree phase adjust, electronicaly balanced in/out, i will be in for at least 4.

greetings,

Thomas

Only I'd be in for a mere two.

Re: 500 series API 312 with 180° phase adjust
« Reply #11 on: July 13, 2011, 07:12:23 AM »
Are you planning to be able to use just the rotator part at line level?

Mark,
I was indeed planning that.
With Ed's 2622 we can switch to 600R input.

peter
http://www.lazpro.com
I reserve the right to not sell to idiots

Re: 500 series API 312 with 180° phase adjust
« Reply #12 on: July 13, 2011, 07:15:13 AM »
from your initial post i thought you ment a simple polarity switch.... if you could supply a pcb with just a 180 degree phase adjust, electronicaly balanced in/out, i will be in for at least 4.

greetings,

Thomas

Thomas,
I'm all about the 500, so maybe.
Possibly a 1U 8 channel?

peter
« Last Edit: July 13, 2011, 07:19:36 AM by peter purpose »
http://www.lazpro.com
I reserve the right to not sell to idiots

mrclunk

Re: 500 series API 312 with 180° phase adjust
« Reply #13 on: July 13, 2011, 09:01:50 AM »
Phase rotator, YES YES!
I've been looking for a circuit for a while but can't get my head round the ones i've found thus far.
I'd like to stick 8 in a module on our desk, so 500 series would be cool.
Not interested in pre's tho either...

Re: 500 series API 312 with 180° phase adjust
« Reply #14 on: July 13, 2011, 09:19:30 AM »

Possibly a 1U 8 channel?

peter
That would be the best!! Is it possible?

Re: 500 series API 312 with 180° phase adjust
« Reply #15 on: July 13, 2011, 09:59:59 AM »
Is it possible?

Anything is possible.
http://www.lazpro.com
I reserve the right to not sell to idiots

okgb

Re: 500 series API 312 with 180° phase adjust
« Reply #16 on: July 13, 2011, 10:44:20 AM »
Don't hit me peter , please .....................

If you mean , being able to vary the phase [shift ] from 0-180 , THAT i could use
for my multi mic'ing & d.i.  inputs
GKB Audio / Greg Boboski

jensenmann

Re: 500 series API 312 with 180° phase adjust
« Reply #17 on: July 13, 2011, 01:10:22 PM »
Interest? Heck, yes of course.
Jens
Quote from: PRR
The tubes of course don't care what frequency they distort

kante1603

Re: 500 series API 312 with 180° phase adjust
« Reply #18 on: July 13, 2011, 04:34:38 PM »
Now that would be great!!! :P
Udo.

okgb

Re: 500 series API 312 with 180° phase adjust
« Reply #19 on: July 17, 2011, 10:46:44 AM »
Bumping for good idea
GKB Audio / Greg Boboski


 

Related Topics

  Subject / Started by Replies Last post
24 Replies
6077 Views
Last post July 07, 2007, 08:21:58 AM
by recnsci
28 Replies
8263 Views
Last post July 02, 2010, 02:34:17 AM
by Ian MacGregor
3 Replies
1818 Views
Last post June 17, 2012, 12:16:11 PM
by login721
50 Replies
2499 Views
Last post December 09, 2020, 11:14:12 PM
by Spencerleehorton