electroslut
Well-known member
- Joined
- Oct 14, 2010
- Messages
- 55
Hi, I am working on a ssl-6000, a brown out took out the power supply a while ago and after I rebuilt it there was some severe distortion on one channel only one the a buss, I tracked it down to the vca compressor card in the 2 buss, but after the board
is on for a few hours the problem goes away? what would you check first the lm394's or the dbx 202c's?
is on for a few hours the problem goes away? what would you check first the lm394's or the dbx 202c's?