FerrariT

Re: 500 series blue face 1176 rev A
« Reply #40 on: November 05, 2011, 06:35:06 PM »
[It would be nice if this was the REV D version!] I'd be all over this!


Igor

Re: 500 series blue face 1176 rev A
« Reply #41 on: November 07, 2011, 02:39:46 AM »
A little point (my $0.2): I saw only one relay at PCB. In case of use of 600 Ohm attenuator, you need to bypass both in and out,
because 600 Ohm is relatively hard load. Or, am I missed something?
http://www.ij-audio.com
(new site hopefully will be up in July)

onlymeeee

Re: 500 series blue face 1176 rev A
« Reply #42 on: November 08, 2011, 12:11:13 PM »
A little point (my $0.2): I saw only one relay at PCB. In case of use of 600 Ohm attenuator, you need to bypass both in and out,
because 600 Ohm is relatively hard load. Or, am I missed something?

You mean, relay for a complete bypass?  I've not done it like that.. I've done it like the 1176, ie. it's a GR off rather than bypass.  That way, you can get nice effect without actual compression.  However if I need a complete bypass, I just do it elsewhere.. mixer insert button or disabling the insert in protools etc. 

[It would be nice if this was the REV D version!] I'd be all over this!

As there's just a few circuit changes, I have actually done a rev D PCB too.  Waiting on metal work for that too as it goes. 

Igor

Re: 500 series blue face 1176 rev A
« Reply #43 on: November 08, 2011, 01:46:48 PM »
Now I see. I did it with 51X-F76 too, when ratio is in "off" mode; 100% agree, very nice sounding distortion box.
However, hardware bypass is MUST for me, to have option to compare etc.
Bypassing the PT insert. Ha! In case of Digidesign converters it is effect by itself (A/D-D/A does adds in this case :)
Not much mixers have mixer insert button.
Anyway, again, my $0.2.
http://www.ij-audio.com
(new site hopefully will be up in July)

Re: 500 series blue face 1176 rev A
« Reply #44 on: November 10, 2011, 06:38:55 AM »
Longtime lurker, first-time poster!

This thing looks beautiful! I'm in for a couple of these as well!

dbeeson

Re: 500 series blue face 1176 rev A
« Reply #45 on: November 12, 2011, 11:06:47 AM »
I'll take one!

Edward

Re: 500 series blue face 1176 rev A
« Reply #46 on: November 17, 2011, 03:44:59 PM »
I'm in for 2 when available. Really cool, good job!

Re: 500 series blue face 1176 rev A
« Reply #47 on: November 25, 2011, 07:21:34 AM »
Well I know this is not exactly a "feeler" thread, but I really, really want a pair of these.

Keep up the great work!

spase

Re: 500 series blue face 1176 rev A
« Reply #48 on: November 25, 2011, 10:54:05 AM »
[It would be nice if this was the REV D version!] I'd be all over this!

As there's just a few circuit changes, I have actually done a rev D PCB too.  Waiting on metal work for that too as it goes.
[/quote]

so you gonna sell rev.d and rev.a ? :)))
THATS GREAT :)))

Re: 500 series blue face 1176 rev A
« Reply #49 on: February 17, 2012, 01:19:26 AM »
What's the status on this one?

Any plans for kits?


spase

Re: 500 series blue face 1176 rev A
« Reply #50 on: March 27, 2012, 08:15:25 AM »
any updates?

Re: 500 series blue face 1176 rev A
« Reply #51 on: March 29, 2012, 03:04:40 AM »
I'm also interested.  :)

onlymeeee

Re: 500 series blue face 1176 rev A
« Reply #52 on: April 02, 2012, 11:23:36 AM »
Hey sorry for the delay.  Couple of albums on the go and also organising another batch of NV73 kits.. but I'll chase up these now.  Some parts have arrived, just need to order a couple of other parts.  Then I'll put up a webpage up with all info like the NV73.  Sorry again!   

spase

Re: 500 series blue face 1176 rev A
« Reply #53 on: April 02, 2012, 12:34:56 PM »
So you gonna stock this compressor? :))))
Please DO THAT ! :D

Re: 500 series blue face 1176 rev A
« Reply #54 on: April 11, 2012, 04:20:42 AM »
Yeah, I want a rack filled with these soooooo badly.

rjuly

Re: 500 series blue face 1176 rev A
« Reply #55 on: June 21, 2012, 07:39:52 AM »
It would be great to know if this is still on the cards.... I would be down for a pair for sure!

kante1603

Re: 500 series blue face 1176 rev A
« Reply #56 on: June 23, 2012, 01:38:03 PM »
It would be great to know if this is still on the cards.... I would be down for a pair for sure!
Same here :)

Dr Gris

Re: 500 series blue face 1176 rev A
« Reply #57 on: July 05, 2012, 05:12:36 AM »
Any news on this? Looks very interesting! I want some!!!!

Kind regards
Magnus

kante1603

Re: 500 series blue face 1176 rev A
« Reply #58 on: August 10, 2012, 02:50:25 AM »
Any news on this? Looks very interesting! I want some!!!!
Same here!

Best regards,

Udo.

Govinda Doyle

Re: 500 series blue face 1176 rev A
« Reply #59 on: September 03, 2012, 09:56:17 AM »
+1 for this project! I would love at least two!


 

Related Topics

  Subject / Started by Replies Last post
18 Replies
3534 Views
Last post January 15, 2006, 02:47:31 AM
by Minguta
0 Replies
1411 Views
Last post May 05, 2006, 04:27:28 PM
by soundguy
562 Replies
136033 Views
Last post July 16, 2017, 08:02:01 AM
by Whoops
263 Replies
64643 Views
Last post February 02, 2018, 06:28:37 AM
by DDay