Anyway to get API Legacy schematics)
- Thread starter fabro
- Start date
Help Support GroupDIY Audio Forum:
nielsk
Well-known member
API is one of the more up tight companies for releasing their schematics.
even if you have one of their boards, good freakin' luck.
pin outs to wire it up are all ya can get.
i really need the center section schematics, but no luck so far...
this is all i have found so far...
even if you have one of their boards, good freakin' luck.
pin outs to wire it up are all ya can get.
i really need the center section schematics, but no luck so far...
this is all i have found so far...
nielsk
Well-known member
The drawing that I posted IS the factory schematic!
You need to be specific about what you are looking for.
The entire aux send system consists of send pots that tap the channel audio, the primary buss system, and secondary buss system. That is all there is to it.
You need to be specific about what you are looking for.
The entire aux send system consists of send pots that tap the channel audio, the primary buss system, and secondary buss system. That is all there is to it.
