mixer frame.. suggestions?
- Thread starter Scenaria
- Start date
Help Support GroupDIY Audio Forum:
gang of elk
Well-known member
could add a mechanical poop-rake and have yourself an old school robo litter box. :green:
maybe even wire up a poop-meter. when it hits the red, stay away!
but seriously, it looks like it'd make a nice drawing table. it's about the right size and angle, has a padded armrest.
maybe even wire up a poop-meter. when it hits the red, stay away!
but seriously, it looks like it'd make a nice drawing table. it's about the right size and angle, has a padded armrest.
MikoKensington
Well-known member
Remember those flip top desks from school?
Probably not you guys are old. :wink:
Make a mastering desk. How about bringing it to Michigan and using it as a sled?
Probably not you guys are old. :wink:
Make a mastering desk. How about bringing it to Michigan and using it as a sled?
G
Guest
Guest
Baby changing tray?
In all seriousness... this is something I am thinking of but I am going to DIY it in wood..
Make it into a tracking mixer...
Fit quite a nice lot of vertically mounted DIY preamp channels
In all seriousness... this is something I am thinking of but I am going to DIY it in wood..
Make it into a tracking mixer...
Fit quite a nice lot of vertically mounted DIY preamp channels
nrgrecording
Well-known member
Looks decorative with flowers in it :wink:
or a little mastering console:
There are 72 discrete opamps in it
some schematics 'n block schems:
http://www.soundperformancelab.de/MMC1/2160_BA_D.pdf :
or a little mastering console:
There are 72 discrete opamps in it
some schematics 'n block schems:
http://www.soundperformancelab.de/MMC1/2160_BA_D.pdf :
not really scen - thats where my diy'in started....
www.ucapps.de - all brd layouts/info on how to go about it right there and u can buy ready made pcbs/kits from SmashTV...
All the pic firmware is already done and customising it is pretty painless - really :thumb:
www.ucapps.de - all brd layouts/info on how to go about it right there and u can buy ready made pcbs/kits from SmashTV...
All the pic firmware is already done and customising it is pretty painless - really :thumb:
