timshel!

Re: why don't we make a SSL channel compressor clone?
« Reply #100 on: February 12, 2010, 01:46:38 PM »
Quote
When the SSM2110 in the 9k channels went obsolete, it was replaced with a 2252 on a small board that slotted into the 2110 socket.

If you got any info on this as well I would be most interested.

I don't have a schematic for the conversion board I'm afraid, but I imagine it would be fairly similar to the app note for converting the 2120 detector to the 2252.

I don't personally have any experience with the 4k channel comps, but I was under the impression the designs were fairly similar and there was some interest earlier in the thread in the 9k comp.


pietro_moog

Re: why don't we make a SSL channel compressor clone?
« Reply #101 on: February 16, 2010, 11:45:24 PM »
guys, i can't do the pcb design.. it's too complicated for me it would take me a lot of time to learn to do.
if someone is interested in doing it, i can pass the eagle schematics and explain a bit what i did.
i saw the 9k schematics, i think we could replace some values and make some corrections to the eagle schematics i did if we choose to do that. they seemed similar to me.

Biasrocks

Re: why don't we make a SSL channel compressor clone?
« Reply #102 on: February 17, 2010, 09:59:37 AM »
guys, i can't do the pcb design.. it's too complicated for me it would take me a lot of time to learn to do.

It is a little beast Pietro.

I've got a board  completed for the 4K Dynamics section. It includes a balanced in/out board and LED driver board, all parts are available and easily sourced. These are authentic to the SSL 4K design. I can offer up boards for everyone to build.

Interest?

Mark
« Last Edit: February 17, 2010, 10:13:14 AM by Biasrocks »
http://SharktankPro.com

"I'd rather use an SPX90 than a UA plugin....." Joe Barresi

strangeandbouncy

Re: why don't we make a SSL channel compressor clone?
« Reply #103 on: February 17, 2010, 10:20:52 AM »
Biasrocks,



    MUCH interest methinks . . . me for instance . . .



     Wonderful news! YEAH! ;D ;D ;D



     ANdyP
. . . . RUH ROH . . . . .

pietro_moog

Re: why don't we make a SSL channel compressor clone?
« Reply #104 on: February 17, 2010, 10:49:46 AM »
guys, i can't do the pcb design.. it's too complicated for me it would take me a lot of time to learn to do.

It is a little beast Pietro.

I've got a board  completed for the 4K Dynamics section. It includes a balanced in/out board and LED driver board, all parts are available and easily sourced. These are authentic to the SSL 4K design. I can offer up boards for everyone to build.

Interest?

Mark



you did it? i thought i was the only one to working on it..
yeah, sure i want them! do you have them in the black market?

helterbelter

Re: why don't we make a SSL channel compressor clone?
« Reply #105 on: February 17, 2010, 12:01:07 PM »

.......

Interest?

Mark

Yes, of course !

guys, i can't do the pcb design.. it's too complicated for me it would take me a lot of time to learn to do.

At least you've tried ! And that's something that will be appreciated by many people, I'm sure!

pietro_moog

Re: why don't we make a SSL channel compressor clone?
« Reply #106 on: February 17, 2010, 04:32:36 PM »
i didn't say i give up. i just do not have time to learn how to make an intelligent pcb design.
i have schematics done in eagle, and the IN-2181-out part done.
if someone is willing to continue this project (pre+expander) i'm fine.

maybe in the future i'll do an SSL EQ board..

Biasrocks

Re: why don't we make a SSL channel compressor clone?
« Reply #107 on: February 18, 2010, 10:35:57 AM »
Preview
http://SharktankPro.com

"I'd rather use an SPX90 than a UA plugin....." Joe Barresi

Biasrocks

Re: why don't we make a SSL channel compressor clone?
« Reply #108 on: February 18, 2010, 12:04:30 PM »
3D Rendering

http://SharktankPro.com

"I'd rather use an SPX90 than a UA plugin....." Joe Barresi

peterc

Re: why don't we make a SSL channel compressor clone?
« Reply #109 on: February 18, 2010, 02:35:12 PM »
Mark, that looks great. What programme did you use for that?

Peter
If opportunity doesn't knock, build a door.


Biasrocks

Re: why don't we make a SSL channel compressor clone?
« Reply #110 on: February 18, 2010, 05:13:06 PM »
Thanks Peter,

I used an Eagle add-on called Eagle 3D

http://www.matwei.de/doku.php?id=en:eagle3d:eagle3d

Mark
http://SharktankPro.com

"I'd rather use an SPX90 than a UA plugin....." Joe Barresi

Biasrocks

Re: why don't we make a SSL channel compressor clone?
« Reply #111 on: February 18, 2010, 10:15:05 PM »
http://SharktankPro.com

"I'd rather use an SPX90 than a UA plugin....." Joe Barresi

Svart

Re: why don't we make a SSL channel compressor clone?
« Reply #112 on: February 19, 2010, 11:45:00 AM »
wow I haven't kept up with this thread but you guys have been busy!

Biasrocks, good job!

Welcome to the GroupDIY leper colony! when something falls off, we just replace it with a tube!
occupation: General Electron Mayhem

Alesis X2 information repository:
http://www.theopiumdenproductions.

SIXTYNINER

Re: why don't we make a SSL channel compressor clone?
« Reply #113 on: April 14, 2010, 03:53:34 AM »
cool work
>>" 1 Picture say what billions words cannot "<< - >>"SMD Kill the DIY STAR"<<
Why in the  forum  if no share

pedroplanet

Re: why don't we make a SSL channel compressor clone?
« Reply #114 on: September 12, 2011, 01:05:52 PM »
Any update?? is this ready?

haima

Re: why don't we make a SSL channel compressor clone?
« Reply #115 on: September 13, 2011, 03:48:35 AM »
Dunno about Mark's project, but Igor has done a 500 series thing that looks similar:

http://www.groupdiy.com/index.php?topic=45348.msg572305#msg572305


 

Related Topics

  Subject / Started by Replies Last post
3 Replies
1880 Views
Last post May 01, 2008, 05:56:42 PM
by VacuumVoodoo
16 Replies
3486 Views
Last post November 06, 2008, 06:41:41 PM
by nickt
3 Replies
3207 Views
Last post June 05, 2010, 01:26:03 AM
by Andy Peters
32 Replies
9422 Views
Last post January 18, 2012, 10:57:19 PM
by Matt Ward