[GROUP BUY] G9 in 51X format (CLOSED, ALL STOCK GONE)

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
the list is growing!

I'm finalizing the PCB design hopefully by next week's end, and then I'll be sending off for the boards. I'll post updates as they come.
Hank Dussen said:
is there price set yet?

the price is not set in stone, as I'm still getting the numbers together. At this point, assuming nobody drops out, it won't be higher than 18USD.
 
hmmm...

I already had to sub out the LL1528 for 1538, so no dual secondaries. (not used in the g9, so I don't know why the 1538 wasn't used in the first place) I'll take a look and see... The edcors offer minimal shielding (copper tape around the bobbin only, no can) so noise getting into the input (especially with high gain) may be a problem.

OEPs are cheaper anyway... you can get an a262a3e with a shielding can for 24USD, edcor mx5CS is about 26USD, and you have to wait 2 weeks before they ship it...

anybody else need to have edcor footprints?
 

Latest posts

Back
Top