Hi everybody,
well I did the Franck's phase correlator (from the remix mag) actually it's work well .
But I need your help for understanding exactelly some things in the schematic. My questions are:
-could explain me why we must put a 47microfarad capasitor between the ground and the +V ?
-what is the goal of the 2 diodes 1N4148 for the last red led on pin 10 and 11 of the integrator?
-what is the goal exactelly of the pin6 on the lm3914?
-what is the goal of the two 100k resistors (at the begining of the circuit)
between the 2 capacitors 100 nanofarad and the ground?
thanks you very much for your answer and your helps.
syl
well I did the Franck's phase correlator (from the remix mag) actually it's work well .
But I need your help for understanding exactelly some things in the schematic. My questions are:
-could explain me why we must put a 47microfarad capasitor between the ground and the +V ?
-what is the goal of the 2 diodes 1N4148 for the last red led on pin 10 and 11 of the integrator?
-what is the goal exactelly of the pin6 on the lm3914?
-what is the goal of the two 100k resistors (at the begining of the circuit)
between the 2 capacitors 100 nanofarad and the ground?
thanks you very much for your answer and your helps.
syl