ruffrecords said:@Pierre, Holger
Yes, the idea is these replace the Schroff side cheeks. All you need to buy then is the various extruded rails. The cheeks are 3 mm thick so you can countersink the screws and butt them together. I thought of adding some tapped holes to make it easy to bolt them together.
I am thinking of using one inch wood for the cladding. The shape of the wood would be the same as the metal but extend downwards one extra inch and mate with an inch thick rectangular sheet that forms the bottom of the mixer. There would also be a wooden rear panel above the XLRs and the woden cheek would also extend an inch at the top to mate with a wooden top piece and similarly extend and inch in front of the fader section to mate with an arm rest.
Frank told me about his new machine. I think it could do this job but I have not asked him yet.
Cheers
Ian
Much better then the way i did it! Great work Ian!
Regards!
Pierre