Orientating on a flat bed CNC-router

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

hobiesound

Well-known member
Joined
Jan 29, 2006
Messages
393
Location
holland
Hi There,

I've been doing some work on a shopbot lately and i have decided i need one for myself. Since i'd rather source a machine in Europe i was wondering if any of you know of a company that builds a machine similarly priced ( +-12000 euro) and sized like a shopbot prs standard (bed size should be at least 2.45Mtr x 1.25Mtr). I found a few companies in holland and germany, but nothing in the UK. So i might be overlooking some options.

Greetings,

Thomas
 
I had two Isel machines. German make. One was a small Da-Vinci machine. The other one was 1.1m x 1.2m with 175mm Z.

They are also marketed as Techno Isel in US. Unimatic Engineers are the UK distributors but they are expensive.

 

Latest posts

Back
Top