Re: JLM AUDIO FET DI (resolved)

shop deals on amazon
Shop deals on ebay
Advertise with us
GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I

ilikeit

Well-known member
Joined
Mar 29, 2006
Messages
123
Location
France
Hello

I have a little problem with my fet di
everything are ok
but i would like to add a link under the input jack
i'm wiring another TRS but any sound go out? :eek:
what is the problem?
how i can make a parallel input?

thx

Greg


J.M gave me an answer
 
the socket on the DI module activates a relay to pass the buffered DI signal to the output. So if you wired a second TRS socket in parallel it would as a thru for the main input socket but not operate as an input socket if just plugged into on its own.
 

Similar threads

M
TAB V372/1 Racking - Shielding Issues/ Humm
Replies
5
Views
630
sonolink
S
S
Junk box mic preamp via JLM Audio GAIN
Replies
6
Views
1K
skipwave
S
H
Neve-ish modded GoldenAge-pre73 w.Carnhill inp TX damping results/advice?
Replies
7
Views
1K
HenryL
H
AusTex64
Klon Centaur repair - what I learned
Replies
11
Views
4K
jesseyasaitis
jesseyasaitis
isophase
Help with ground loop problem : synth > small mixer > tube DI
2
Replies
31
Views
5K
isophase
isophase

Latest posts

Back
Top