[duantro]

Hello,
I've had a friend help me build a AKG C12 clone ala Oliver Archut's mod. I'm having a hard time finding a Power Transformer. Can anyone recommend somewhere to look in North America? here are the suggested spec's:
Power transformer - not less than 15W, the anode 130 - 150V, no less than 10mA, the heater 10 - 12V, not less than 0,6 A

[moamps]

Hammond 262E12

Regards,
Milan

[Blue Jinn]

I have some extra toroids, spec'd at 120v:135v/40mA, 9v/500mA. I had these custom wound for a G7 PSU. PM me if you want one. I'm in North America. (They were mistakenly wound for 50Hz, which isn't problem in 60Hz land, (60 at 50 can be) which may account for the slighly higher secondary voltage. PM me if interested.

[LHS]

why not use Oliver's T14?
http://tab-funkenwerk.com/id76.html

[gyraf]

..it won't handle 15W..

[duantro]

Thanks for the replies. That Hammond 262E12 should do the trick. Isn't Oliver"s t-14 is an output transformer?
I plan on trying a vintage oktava mk13 capsule in this (not pictured). I had the capsule in a lomo 19a9 (using only one side) and it sounded great. Any thought on this?

[kante1603]

Isn't Oliver"s t-14 is an output transformer?

Yes.

Udo

797audio CR998 Mic (AKG C12 Clone)

Started by The Lab

AKG C12/C28A output transformer wiring T14/1 any info......

Started by gary o The Lab

AKG C12 Power Supply Question

Started by chrispsound Microphones

AKG c12 NOS transformer incorporation

Started by cameltone The Lab