I have searched all over the web for a replacement pot for the "Air" band of a Nightpro EQ3-D. The original pot is a Bourns "91C1D-D20-T23L" which is a 500k reverse audio taper pot with a 1/4" bushing and an 1/8" x 5/8" shaft. I contacted Bourns and none of their distributors have any stock. The only Google hit was a company in England that sells by the 1000's. Nothing at Digi-Key, Mouser, or Newark. In fact nobody has anything compatible in stock.
I don't care if it's not PC mount and I am ok with drilling out the holes for a larger bushing and shaft, but the body of the pot still has to be no more than 5/8". Also the shaft length is important (lol). Any suggestions or sources would be appreciated.
Mike
I don't care if it's not PC mount and I am ok with drilling out the holes for a larger bushing and shaft, but the body of the pot still has to be no more than 5/8". Also the shaft length is important (lol). Any suggestions or sources would be appreciated.
Mike