Vintage Tube & Vintage FET Microphone PCB Kit For DIY & New D7 Custom Capsule

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Shipped to US and Berlin today ,
Thanks,  :)
Best,
Dan,
 
Shipped to US,
Thanks all,
Best,
Dan,
 
Hi All, Just wanted to let you know that I receive my transformer from Mark today from Samar Audio  :) Thanks Mark
I have done a fit verification as of now and it seems to fit perfect for the D-EF7 and D-47 Project

D-EF47 Project
http://www.vintagemicrophonepcbkit.com/D-EF47.html

D-47 Project ,
http://www.vintagemicrophonepcbkit.com/D-47.html

here is what you need to do to install one of these  8),  Another Great option For this Mic project.

you can Reach Mark here : www.samaraudiodesign.com
or you can PM him Direclty Here (Marik)

58d1402a08267.jpg


58d1402a08294.jpg


Tie%20Backside.JPG


58d02819945b6.jpg





 
All New Build guide available trough the website Web and PDF version

Thanks To Steven Jensen For this Build Guide.
available here:
http://www.vintagemicrophonepcbkit.com/DU67.html

I will be receiving next week adaptor pcb for the AMI Classic Series BV12 as well,
58d02819945d4.jpg


Best,
Dan,
 
Hi All, I am pleased to announce another Transformer Support Options for the D-67 Tube Mic .
this announce and explain how to install the AMI Classic series BV12 to your D-67 PCB Kit,
please request separately with the AMI and external Transformer PCB Kit Style not on web store yet


First , install the transformer with M1.6 screw and nuts , use little plastic washer to make sure the transformer is not in contact with the screw. I haven't put them for the demonstration but use them ,

A) Slide Fit the Transformer in The cutout and screw the adaptor pcb in place
58d1402a08356.jpg


58d1402a08367.jpg


B)  Very Gently snip a little bit of thre plastic corner  Make sure you don't damage the transformer wire close to it ,
Use this kind of precision Snippers,


58d1402a08379.jpg


58d1402a0838a.jpg


C) This will looks like this after the Snips
IMG_0786.JPG


D) Then Close the Shell and it will slide in with no interference at all,

58d0281994605.jpg


Enjoy and continue your build.


best,
Dan,




 
Here are Happy 2 Transformer Suggestions for D-251 Build and D-87 Build ,

Cinemag 13113 For D-87
Cinemag 13114 for D-12 or D-251


Best,
Dan,

They fit so well in there it is a press fit no glue or screw required no tie Wrap , Litterally pops it in place  :)

58d0281994641.jpg
 
Shipped all order this morning ,
Thanks for your patience as i had some setbacks this week,
Best,
DAn,
 
Shipped to US this morning ,
Best,
DAn
 
poctop said:
Hi All, I am sure that a lot of folks are already aware of this,  but a load of microphone body  for all my projects just landed at Studio939 Webstore.

see here:
http://store.studio939.com/category/microphones-and-parts
http://groupdiy.com/index.php?topic=50015.880

Thanks for doing this Chunger.

Best,
Dan,
I have some problems with getting my order from studio939. How long has people need to wait for them?
 
Shipped all order to US this morning ,
thanks all,
Best,
dAn,
 
burdoto said:
will you have the stryroflex cap kit available for the D67 anytime soon?

I might have some kits but did not update the inventory yet ,
i will check andf let you know,
thanks,
Best
Dan,
 
all order shipped to US today ,
Thanks,
Best,
Dan,
 
poctop said:
all order shipped to US today ,
Thanks,
Best,
Dan,

Dear poctop,

How I can do for buy some boards U87 boards (the rectangular ones!!)??

Thanks
Opacheco.
 
opacheco said:
poctop said:
all order shipped to US today ,
Thanks,
Best,
Dan,

Dear poctop,

How I can do for buy some boards U87 boards (the rectangular ones!!)??

Thanks
Opacheco.

I would like to help but you inbox is Full,
LEt me know
Best,
dAn,
 
poctop said:
opacheco said:
poctop said:
all order shipped to US today ,
Thanks,
Best,
Dan,

Dear poctop,

How I can do for buy some boards U87 boards (the rectangular ones!!)??

Thanks
Opacheco.

I would like to help but you inbox is Full,
LEt me know
Best,
dAn,

Dan,
I am sorry!!.....but that is ready now.

Thanks
Opacheco.
 
you can visit here

http://www.vintagemicrophonepcbkit.com/orders.html

everything is listed on this page ,
Best,
Dan,
 
Back
Top