Vintage Tube & Vintage FET Microphone PCB Kit For DIY & New D7 Custom Capsule

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Rocinante said:
Almost done with my second d-u87. Styrenes and stuff arrived yesterday to finish the job thanks to you.
And thank you for such a great project with such astounding results. You are an artist and a genius dear sir.
Cheers
Dylan

thanks for the kind word, I am glad you are happy with your new toy ,
Best,
dan,
 
Thanks all, I shipped all pending PCB orders today,
tomorrow, I should be doing the assembly of a couple D7 Capsule  ;)
a Few should be available soon PM me if interested

D7 Capsule

D7%20Backplate.jpg

58d028199472c.jpg


Best,
Dan,

vintagemicrophonepcbkit.com

 
poctop said:
Thanks all, I shipped all pending PCB orders today,
tomorrow, I should be doing the assembly of a couple D7 Capsule  ;)
a Few should be available soon PM me if interested

D7 Capsule

D7%20Backplate.jpg

58d028199475c.jpg


Best,
Dan,

vintagemicrophonepcbkit.com

thanks All,
D7 Capsule out of stock,
Best,
Dan,
 
Shipped to US and Norway,
Thanks All.

Available Soon 
58d028199478c.jpg
 
PCB order shipped , To Australia, and Canada,
thanks all,
Best
Dan,
 
Shipped to US,
thanks,
Best,
Dan,
 
Shipped to US and Australia and France and India
Best,
Dan,
 
Hi All,  The Official D7 Capsule Launch , There will be special introduction Prices for a Limited time Only,

From Thoughts to Metal to Soundz,

58d1402a08737.jpg



58d1402a08748.jpeg



235USD  Per Capsule (D7 Mount included) Shipping and PP fees Extra
For a Limited Time only

D7 is an M7 Style Capsule built with Mylar Gold Sputtered 6um
D7 Mount is 58mm in Height


*** D7 Mount do not Fit GT2B - Style Microphone Headbasket because of the standard U47 height Requirement ,
I am planning to make smaller footprint mount to render the GT-2B Style compatible at the moment.

(7 Unit in Stock)
PM me if interested , I am offering those for group DIY only at the moment.

Best,  :)
Dan,

D7 Microphone Capsule

58d1402a08755.jpg


58d1402a08766.jpg


D7%20Backplate.jpeg


D7 Mount
58d02819947aa.jpeg

 
poctop said:
*** D7 Mount do not Fit GT2B - Style Microphone Headbasket because of the standard U47 height Requirement ,
I am planning to make smaller footprint mount to render the GT-2B Style compatible at the moment.
damn... :-\
 
mastertaenia said:
poctop said:
*** D7 Mount do not Fit GT2B - Style Microphone Headbasket because of the standard U47 height Requirement ,
I am planning to make smaller footprint mount to render the GT-2B Style compatible at the moment.
damn... :-\

Maybe you would like to help out on some measurement and I could make them available as well for shorter headbasket ,
I know the GT-2B is much spread-out so it might be nice to have it made as well.
Let me know
Best,
Dan,
 
poctop said:
mastertaenia said:
poctop said:
*** D7 Mount do not Fit GT2B - Style Microphone Headbasket because of the standard U47 height Requirement ,
I am planning to make smaller footprint mount to render the GT-2B Style compatible at the moment.
damn... :-\

Maybe you would like to help out on some measurement and I could make them available as well for shorter headbasket ,
I know the GT-2B is much spread-out so it might be nice to have it made as well.
Let me know
Best,
Dan,


no problem...
pm for more info  8)
 
Hi All, in the meantime i am producing shorter stand for the Gt2b Style mic ,  Fred Suggested this to use the D7 mount in the GT2B style mic the capsule will sit at the nominal height as originally in the Gt2B , using 2 bolts about 3-4mm thickness and 2 M2 screw a bit longer ,

58d02819947ff.jpg


The Shorter mount i am to produce, the capsule should sit in the GT2B headbasket as the per the original height of a short body U47 or U47 Fet,  meaning that the capsule top portion will sit right on the headbasket ring.
Thanks to Fred for this Tip.

Stay tuned,
best,
Dan,
 
Hi All,
All pending order have shipped , PCB Kit and Capsule, 
I have 1 x D7 Capsule remaining at this time, 
thanks to everyone
Best,
Dan,


 
Hi all Shipped today to US,
BEst,
DAn,
 
Shipped to US , Germany, France,

D7 Capsule out of Stock

Some are at the cleaning Stage ATM  :)
58d028199483f.jpg


Best,
Dan,
 
Shipped to US, Today,
Best,
Dan,  ;)
 
Shipped to US and Poland ,
Thanks All,
:)
Best,
Dan
 
Here is a picture of my U47 I built with Dans D7 capsule and Cinemag hi nickel transformer! This mic is absolutely amazing, it has that air and rich vibe that the U47 are known for! I couldn't be happier!
 

Attachments

  • image.jpeg
    image.jpeg
    146.2 KB · Views: 49

Latest posts

Back
Top