audix 35102 (v03) edge connectors, pinout wiring

does anyone have any pinout info on the audix 35102 channels? are the edge connectors hard to get? arty 

Not sure about the connectors, but here is a pinout I copied from a post found somewhere online (maybe here?)



Audix 35102 E
1.     Mic / Line in +
2.     Mic / Line in –
1.     Mic / Line in shield
1.     0 volts
1.     Line out unbal. +
2.     Line out shield
1.     24 volts +
1.     Ground
Notes:
Tie pins 10 and 11, also 10 and 41
Tie pins 22 and 23

I also have some schematics and mod notes for these modules if you want them.

thanks for the info, if you have any schematics that would be great. these are AUDIX 35102 version V03 the single ne5534 opamp. thanks again arty

[email protected]

Files too large to upload here.  Sent you a PM.

mike thank you, this helps big time. arty

does any one have any edge card connectors for these, or are the even avalible anymore? it says ELCO 7023 on the 41 pin connector.